Search Results

Search results 1-20 of 522.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • You're welcome, thanks for the kind words.

  • You can't go wrong with a good 60/40 rosin core. I use this: amazon.com/MG-Chemicals-Leaded-Solder-Diameter/dp/B073VRYQVT

  • MG makes a great no-clean as well, similar looking bottle to the one psykom1 linked. If I'm doing rework on a dirty board I use rosin flux, if the work is cleaner to begin with, I'll use no-clean.

  • Quote from psykom1: “This stuff is the Bomb Diggity!!! Smells great too. The only cons to this stuff is that it's sticky when it dries. God forbid you ever spill a bottle. Usually it cleans up well with some 99% alcohol. ” This is what I use too. Good stuff.

  • Chinese eproms

    skate323k137 - - General Arcade Tech Help

    Post

    Quote from -Ace-: “I don't understand why they would re-brand chips to something totally different. Obviously the end user is looking for a particular chip and isn't going to be able to use these for the purpose they were ordered, etc. ” It's really sad, but at least you didn't get bogus capacitors. I've seen some crazy caps that aren't what they're labelled, and could have caused serious harm. Do you mind revealing where you ordered the EPROMs?

  • Chinese eproms

    skate323k137 - - General Arcade Tech Help

    Post

    Quote from Ace`: “Don't think I've ever found a need for 1024s, the only thing that uses them is MVS bios and then I usually just use a 4096 (with a 4x image). ” same here. I saw an snk stickered 4096 on a 6 slot once and I've used 4096s ever since.

  • Should I be changing a battery on my systems to avoid this situation?

  • The capcom IO was literally made to do this. It will power a cart just fine. You just need the power cable that goes between the IO and Naomi. ebay.com/itm/Cable-Power-Jvs-I…ower-Supply-/174038196125

  • Quote from GC8TECH: “IF people want the original Non-Super Version cart WITH the rom mod to the SUPER edition.. i can probably source more carts to do that.... OR I could do just the eprom ONLY for a few $AUD as well + Post. ” Quite a nice offer of you. For folks in the US, I can burn the rom as well, though I'm in short supply of m27c160's till my next batch gets here (and lord only knows when that will be).

  • I always had weird issues with my sega cabs until I used a proper 120 to 100v stepdown.

  • Quote from RandomRetro: “Hadn't seen this before and was trying to track down a Super cart. Hard to find the cart, so this may be a good alternative. Thanks @skate323k137! ” I don't think I've seen a super in recent years, but at least a year or 2 ago the normal version wasn't too hard to find. Hope you can find one and enjoy this unique game

  • I hope some folks have found this useful. Can this please get moved to the PGM section?

  • As far as grounding you can ground anything that needs it to that floor screw. Then take an ohm meter and make sure continuity exists between that ground screw and the ground prong of your AC Cord.

  • fairly certain phase doesn't matter after an isolation transformer. Since isolation breaks the connection to ground, the AC lines are the same as each other. If your monitor requires isolation, don't try to run it without a transformer. Doing so risks shock etc. This is a good read for anyone working on monitors teaganm.cademo.com/images/other/randyfromm/isoxfmr.htm

  • Hiya From St. Louis

    skate323k137 - - Introduce Yourself!

    Post

    Sans Covid I would be in Tower Grove park racing skateboards. That or passed out from a Bogarts coma. Welcome aboard.

  • Blast City PSU Recap

    skate323k137 - - Other Sega Hardware

    Post

    It's definitely worth it. It cleans everything up, video even usually looks clearer with a recapped PSU.

  • Quote from rewrite: “Quote from skate323k137: “But with that said I wish nobody any harm and lord knows I don't want legal action taken against the site. DS, if you do have true legal concerns with Sega just let me know man, but I've never seen them go after a forum. You gotta be bootlegging beatsaber cabinets or something for that kind of action. Most of the immediate injunctions I've ever seen were for high dollar bootleg purses. Definitely not our cup of tea here. ” Out of curiosity, what con…

  • Quote from ITATTRACTS: “Quote from skate323k137: “I left because Finisterre came here with good intentions and more hacking skills than 99% of us, myself included. He got shit on left and right for publishing good data here, regardless of generation of hardware or sega support. Sega doesn't give a shit what we post here unless its roms. Code written from scratch is perfectly legal under Right to Repair. With no disrespect to Darksoft or any individual here, finisterre could have been a great ass…

  • I would honestly love to stay / come back. Aside from one bad deal with an impatient member that I won't go in to, I had years of great times contributing to this forum. BTW regarding that deal, if you're reading this, my bad too. I was in the middle of moving and I'm sorry about the issues. Not to toot my own horn, but I've been around for a second. I donated more than once to the Atomiswave to naomi project. I bought a first run STV multi I still love. I made over 1000 posts here, traded with …

  • I left because Finisterre came here with good intentions and more hacking skills than 99% of us, myself included. He got shit on left and right for publishing good data here, regardless of generation of hardware or sega support. Sega doesn't give a shit what we post here unless its roms. Code written from scratch is perfectly legal under Right to Repair. With no disrespect to Darksoft or any individual here, finisterre could have been a great asset to this forum. Trolling or not he's done a shit…