Search Results

Search results 1-17 of 17.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Quote from gabrielizm: “Quote from freddiefiasco: “Thanks all. I was able to figure it out by posting my question on here. I ended up re-wiring my harness and there was a cross connection between my 1P SW1 and 1P SW3. After testing continuity, these two switches ended up being connected. My Multi 1.4 works again. However, I did find that when I loaded 2.0, none of the controls registered. Not sure what I'm missing but if my harness and JVS works with 1.4, were mappings changed in 2.0? The change…

  • Quote from freddiefiasco: “Thanks all. I was able to figure it out by posting my question on here. I ended up re-wiring my harness and there was a cross connection between my 1P SW1 and 1P SW3. After testing continuity, these two switches ended up being connected. My Multi 1.4 works again. However, I did find that when I loaded 2.0, none of the controls registered. Not sure what I'm missing but if my harness and JVS works with 1.4, were mappings changed in 2.0? The changelog did not mention map …

  • i am so stupid,rewrite which one the power connector?

  • UPDATE i change my SSD into new one,and IT LOOKS LIKE IT WORKS!! i dont get into menu,i got this instead. i plug my JVS IO like this. i just plug the USB B to A into the TTX2,but the IO doesnt detect at all, do i need to plug the whole harness to test the HDD ?

  • Quote from Niko: “you might try a different SSD/HDD. ” yep,tried it on different Taito Type X2 machine,Still same problem,the issue must be on the SSD. Niko,i got another Taito Type X2 with different VGA card,i believe its Nvidia 7900 ,it wont boot up pass the taito type x2 logo,i just got NO SIGNAL,after Taito SplashScreen. what to do?should i buy another VGA card (Elsa Gladiac) ?

  • Quote from Dreygor: “Quote from gabrielizm: “but i can boot up SFIV HDD + Dongle just fine. ” Ok .. I have no explanation of that then. Maybe try a different computer to make your image? I am running out of possible solutions. ” its weird man,just one year ago i made this Multi with the SAME SSD and SAME method,but this time it doesnt work,its so weird.

  • Quote from Dreygor: “I have used dozens of different SSD and HDD drives on the TTX2 units and never had an issue. So I am thinking this is not a hard drive issue. I don't think you can even enter the bios menu even with a keyboard attached. Right now the only things I can think of is checking cables, switching to different SATA ports, or (I hate to say this) your TTX2 motherboard just plain simply went bad. ” i tried 3 different ports from the motherboard, all doesnt work,try changing the sata c…

  • UPDATE i use Niko Multi File 128 GB,still doesnt work,same problem. Taito Splash Screen and then Operating System Not found. do you guys have a SSD compatible list ? my Kingston Supposed to be working well,but in this case i am gonna try to buy another SSD. i believe this is not the Image Problem,its either the SSD or the TypeX2 itself. do i need to setting the boot priority in BIOS menu? do i need to plug PS2 Keyboard or USB Keyboard

  • Quote from Niko: “Quote from gabrielizm: “UPDATE it doesnt work,i didnt expand games partition,still doesnt work,same problem. does anyone have torrent link with full games on it? i dont know what to do anymore. ” I've sent you a PM ” Thanks Niko,downloading it now.

  • UPDATE it doesnt work,i didnt expand games partition,still doesnt work,same problem. does anyone have torrent link with full games on it? i dont know what to do anymore.

  • Quote from Niko: “What are you using to expand the Games partition? Does it work prior to expanding the partition? ” i am using windows disk management and mini partition wizard,both doesnt work. i am gonna try not to expand the partition now. do i need to plug the usb IO board while booting TTX2? this is what the hdd looks like in Easeus parittion master

  • Quote from Niko: “What drive is it? Make/Model? The dipswitches shouldn't matter. Dip2 is the only one used by the multi. ” i use this model Kingston A400 sata3 6gb/s 120 GB SA400S37/120G i already made on using the same drive ,same model,same file,even same computer,it works like charm last year. . but now it got this problem.

  • Quote from Niko: “I'm assuming you are not getting any errors from HDD Raw Copy Tool during the write process? After you write the drive image, are you able to see the three partition on the drive? ” i dont have any errors in the writing process,and i able to see three partition . dipswitch 1,2,5 is on i already copied Artfate Front end to my Multi SSD

  • sorry for double post. here is the update 1. fresh install using HDD RAW COPY when HDD still RAW,Booting-Taito Type X2 Splash Screen Loading - "Operating System Not Found" 2. Deplug the whole HDD,Booting-"Operating System Not Found" TTX2 Splash Screen doesnt Pop out. 3. Change the SATA Slot on HDD,still doesnt work. 4. Change the SATA Cable,still the same issue. 5. Redownload the Multi Image,using the same method on number 1. still Operating system not found. i dont what to do

  • Quote from Niko: “Check the sata cable is plugged into the motherboard and SSD securely. This error typically happens when the X2 doesnt see the drive. ” I am using the same SATA Cable for original SFIV HDD and it works fine,i thought that at first. the sata cable are loose,but its not. already change the sata cable too,still the same issue. i still see the Taito Type X2 Splash Screen.and then the "Operating System not found" came out. Quote from Dreygor: “I believe you do not need to format the…

  • Quote from Dreygor: “I also used WinImage and was having problems .. how ever I started using HDD Raw Copy and everything seemed to work fine. hddguru.com/software/HDD-Raw-Copy-Tool/ ” i use HDD Raw Copy too,but got the same issue,please help. do i have to make HDD Raw and not format it into NTFS ?

  • Help! i got "Operating System Not Found" i made one Multi Game using the same file from the first page one year ago,and it runs well.now i made another using same SSD,Same Image and i got this. what to do? One year ago i use Winimage to write the image to SSD,and it runs well, now i use HDD Raw Copy as Niko Suggested,but what i got is "Operating System Not Found" i tried using Winimage now and still got the same issue.