Search Results

Search results 1-20 of 111.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Quote from brentradio: “Quote from Nodoyuna: “Is the rotary switch a solderless plug? ” Yes! Next to the dip switch bank on your multi kit (M72 and C2) there should be 8 pins. The rotary switch connects directly to them via a plug. You can see this in the pic below (small black 8 pin plug). brentradio.com/images/MultiMulti/C2/DSCN0700.JPG ” It seems I'll need two switchers BTW, the image link gives me an 404 error

  • Is the rotary switch a solderless plug?

  • ATAPI/IDE ODE Testing

    Nodoyuna - - System 246/256

    Post

    I think this device can sell tons of units, both in and out the arcade community BTW, I'm interested in at least one or two units

  • Thanks for the anwers It seems it's a good option, but maybe not the best I saw a 20L5 on ebay, but it's like 1200$ plus shipping costs and maybe customs cost too, so I think it will be risky to get it from USA to Spain and get undamaged, besides it's a bit on the expensive side...

  • Hi... I'm going to buy a 20" PVM monitor, as I want to have a 20" setup too I don't want to pay 2000$ plus shipping that are asked for the best BVM monitors I have a good price on a PVM-20L2MD Is this monitor a good option for 15KHz gaming? If not, which 20" monitor would you recommend? I'm open to other brands too Thanks in advance

  • Hello from Valencia, Spain

    Nodoyuna - - Introduce Yourself!

    Post

    Bienvenido! Parece que somos ya unos cuantos paisanos por aqui...

  • Interested if this multi is finally done! Also interested in the process of making a multi

  • Interested in one of these when available

  • Is it possible to make only a kick harness extender?

  • Glorious Irem M72 multi

    Nodoyuna - - Project Showcase

    Post

    @Mitsurugi-w Can I request to be moved to the last spot on the waiting list? I'm yet to find an M72 board, and it seems it will be some time until I got one, so my spot can be used for somebody who already has a board and I can be moved further back in the list, until I manage to get a M72 board Thanks in advance

  • I'll need one of this too Just let me know when they're available

  • Glorious Irem M72 multi

    Nodoyuna - - Project Showcase

    Post

    I'm also interested in one game selector, it it's done

  • Hi I'd like to be included in both lists Thanks

  • [SOLVED] Lines on my VGA monitor

    Nodoyuna - - Monitor Help

    Post

    Hi So, yesterday night I opened the monitor, and now the lines issue is fixed It was the first time I was seeing the inside of a tube monitor, so I was lost at first, but I was able to locate the SCREEN pot and lowered it a bit to the left and the lines dissapeared Now the image on the monitor is even better than before Thanks for the help and tips on what was needed to be done to fix the issue

  • [SOLVED] Lines on my VGA monitor

    Nodoyuna - - Monitor Help

    Post

    Quote from Frank_fjs: “ I need to warn you as I don't want to be responsible for any damage to your monitor. Sometimes things are best left alone, if it's working don't try to fix it philosophy. ” Don't worry... If I finally try to fix it, it will be my fault is something goes wrong In fact, the question is mostly about if these lines can damage the monitor or are bad for it in the long run... They're expensive monitors and I'd like to be sure that there is nothing wrong with it I'm pretty caref…

  • [SOLVED] Lines on my VGA monitor

    Nodoyuna - - Monitor Help

    Post

    Quote from Frank_fjs: “Nothing out of the ordinary, they're just the ray trace lines. Usually happens when the screen pot (brightness) on the chassis is dialled in too high. ” Thanks for the answer Oh, I thought there was a problem with the CRT... So, if I put a lower brightness, this will be "fixed"? There is a knob for brightness and contrast on the back. Can I check from there or do I need to open the monitor and move the brightness pot on the inside? Thanks in advance

  • [SOLVED] Lines on my VGA monitor

    Nodoyuna - - Monitor Help

    Post

    Hi I've noticed my VGA monitor (Hantarex CT28EV) has developed lines on the screen imgur.com/VGhuupz This lines appears with only the monitor plugged with no video source What can be the source for these lines? Can be fixed somehow? Thanks in advance

  • It does look great. Definitely interested in one of these...

  • Quote from jassin000: “Quote from Nodoyuna: “Still, I don't have any System 16B game ” I was just over at KLOV today and someone was selling a Golden Axe (S16) for 150$.That is one hell of a deal if you consider what Golden Axe has been selling for lately. ” I'll look KLOV right now

  • Quote from Apocalypse: “Quote from Nodoyuna: “@Apocalypse Do you plan to do an updated version of this multi with SD for storing the games, flash to load and support for the complete library? (I mean all regional and versions, like in MAME) ” I don't think so, that's a whole lot more work and would make the multi very expensive (hardware would then be similar/to the level of the CPS2 multi). Apart from the language I don't see any difference between versions (but I'm no expert). ” No problem, cu…