Search Results

Search results 1-20 of 197.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • And painted arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0

  • So! These arrived in the post last week or so ago! First up, the repro game plate with mounting hardware for a 3.5" HDD. The standoffs are flush with the outer plate surface. arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 This is the SSD adapter - two brackets to reduce down from 3.5" to 2.5" arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 With a HDD in place the screw holes align with the TTX case lid and measurements a…

  • Taito Type X Upgrades?

    nam9 - - Taito Type X

    Post

    Last one. Picked up a Sapphire 9600 PRO 256 card for cheap. This uses BGA memory unlike most cards in this range, so perhaps some better specs there too. arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 Boots up and runs fine. More testing required

  • Replacement fan?

    nam9 - - F3 Multigame Cart

    Post

    Appreciated @waiwainl

  • Huh. Wonder what happened with their IGS silkscreening post Pascals v8. arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0

  • Replacement fan?

    nam9 - - F3 Multigame Cart

    Post

    Question... Does the F3 fan blow air UP (into the duct)? Yes, I removed mine a while ago and forgot to take not of the orientation Thanks in advance...

  • Quote from GC8TECH: “i have PCB NO-0133-1 AND PCB NO-0133-3. ” Pics? Guess they both look like the NO-133-5 board..

  • I have a second that is IGS PCB NO-0133-5 that looks identical to your first... Are you sure yours is 0135 and not 0133?

  • Quote from twistedsymphony: “interesting. it's got a lower number, but like you said, it clearly fits after my first board. ” If you check the back its designated 41-069-B4-09.

  • Quote from twistedsymphony: “Does anyone have any version of the Mobo other than the 3 I've listed in the top post? ” Yes, actually... arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 Check between the battery and crystal... Think it fits between your oldest and your 2nd oldest...

  • Taito Type X Upgrades?

    nam9 - - Taito Type X

    Post

    On Graphics cards I have tested a 9600XT 256, a 9600XT 128 and a 9600 (!PRO) 128. The XT 256 booted, but threw software errors. The XT 128 I chose as it looked identical to the TTX+ card. That gave software errors, then graphical glitches and then died... The 9600 128 was advertised as a PRO, had no external markings as such so I am assuming it to be a vanilla 9600. The vanilla 9600 128 boots to the multi and games are playable with the exception of Tetris TGM (For that the game is clearly runni…

  • Taito Type X Upgrades?

    nam9 - - Taito Type X

    Post

    So it was my SATA to 44pin IDE adapter that was the cause. A 40 to 44pin IDE adapter has solved the issue. Noticeable decrease in boot time is nice.

  • ...which are the amp connectors and what was the issue on yours? Are they the surface mount PC2-24 in the above pic?

  • Hi. I have an issue with a Sega Jamma JVS I/O. This one: arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 I am using it in conjunction with a TTX. Problem is that P1 Button 2&3 are shorting. Each individual press on each gives simultaneous input on both. I have checked continuity at the jamma edge (none), and followed each input trace through to the microcontroller (also good). I have tested with two different joysticks and with JP1 in both A&B positions. No change. Is it screwed? Is the…

  • Fast I/O vs JVS

    nam9 - - Taito Type X

    Post

    Quote from connor: “Let me see if I can find some on YAJ, I got my whole FastIO setup from one guy in the states I got very lucky. Here's an auction I found on YAJ for two of them: buyee.jp/item/yahoo/auction/q273612619 ” Well that's 50% cheaper than I've come across... nice. Quote from penrhos: “I've got a couple without the covers if anyone needs one. ” DM incoming...

  • Fast I/O vs JVS

    nam9 - - Taito Type X

    Post

    Quote from connor: “RFID readers are really cheap and easy to find ” ... Link?

  • So has @lydz created custom GFX board now too? I can see that my Ketsui Prog board is missing the jumper wire @twistedsymphony had on his Espgaluda board. So looks like the board design is being improved upon. Mine is v0801 it seems... arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0

  • This thread is getting rather unwieldy, and I'm here to be part of the problem. Picked up two cards from @lydz on Taobao (side note, cannot recommend TaobaoFocus enough). On the Custom PCB I see the usual missing bypass caps etc. arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0 I have a bunch of 100nf 0805 caps that I use on the NeoGeo 120 in 1 multi carts. Should I throw som…

  • Has anyone checked the necessary clearance for using a 3.5" HDD with the TTX2? One simple option could be to use 4 hex standoffs with the HDD plate on top: arcade-projects.com/forums/ind…5c145ea2db63e2864ac2e8cd0