Search Results

Search results 1-20 of 191.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • I noticed that its a wei-ya chassis. Is the the original tube or was it swapped?

  • Lol that’s just silly. I wonder if that’s only certain rom sets that do that.

  • Nanao MS-2931

    BlinG - - Monitor Help

    Post

    I've always read that flybacks on the nanao 2931 almost never go bad. So it's hard for me to believe that the flyback is legit busted. Also, why did you send it to a Chinese repair shop? You're probably never going to see it again...

  • Toshiba PF D29C051 chassis

    BlinG - - Monitor Help

    Post

    Quote from nem: “Quote from BlinG: “No it won't fit in a blast. You might be able to do some hackery to get it to somewhat fit, but it's not in any way a "drop in" replacement. ” Well, I wouldn't say that. The bezel won't fit, but other than that I can't think of any reason why it wouldn't "drop in". The frame needs to be correct one with the four D-shaped holes in the corners. ” Well, when I think of "drop in", I think that no modifications is needed whatsoever and it'll fit like an original. I…

  • Toshiba PF D29C051 chassis

    BlinG - - Monitor Help

    Post

    No it won't fit in a blast. You might be able to do some hackery to get it to somewhat fit, but it's not in any way a "drop in" replacement.

  • Quote from jassin000: “You can order a two player panel from Taito right now, I don't see what the issue is. I have ALL three of them (F, L, Nesica)... ” no-money-.jpg

  • Nanao MS-2931

    BlinG - - Monitor Help

    Post

    Quote from bboycap: “I am thinking if I can't save my 2931 chassis, can I use 2930 chassis on 2931 tube instead? Does anyone know if that's perfectly compatible? ” yes it should work. You might need to make some adjustments, but it should display fine.

  • Pocket Fighter does utilize 1MB mask roms. I've never actually tried to convert anything that uses mask roms less than 4mb on an All in one board. Not saying that this is the issue, but just a thought. You using phoenix code or infinikey?

  • Quote from parodius: “Quote from BlinG: “99% sure this is a jumper issue. Have you opened all the jumpers? All PALG games that i've converted on black boards require that ALL jumpers be open. ” JP3 to JP6 are all open, I just double checked with a multimeter. Which games using 8 graphics mask roms have you converted successfully ? ” do you have a picture of the board so I can see the rom layout? I've successfully converted to Alpha 3, Super Turbo and Hyper Anniversary.

  • 99% sure this is a jumper issue. Have you opened all the jumpers? All PALG games that i've converted on black boards require that ALL jumpers be open.

  • Not necessarily. It could just be a dirty contact somewhere on the chip and just needs to be cleaned up. I think if the chip was completely toast the game wouldn't even boot.

  • Nah, the customs are typically the big square chips that say "Capcom" on it.

  • I don’t know the cps3 board that much cuz I haven’t had the need to troubleshoot one, but if it’s anything like the cps2...everything button related eventually routes into the custom. Look for any broken or lifted pins on the custom.

  • CPS III Bios and CD Releases

    BlinG - - CPS III SuperBIOS

    Post

    No, what bothers me is when someone requests for a complete change in something that isn’t broke to begin with. I am looking at it from a developer perspective. There’s been countless times that I see something that works perfectly fine but it doesn’t satisfy that one person and asks to change it all just to fit their needs. Maybe I am overreacting a bit over this, but I just don’t see the need to change anything on something that works perfectly fine. At the end of the day though it’s darksofts…

  • CPS III Bios and CD Releases

    BlinG - - CPS III SuperBIOS

    Post

    Quote from KaPH33n: “Quote from BlinG: “I dont understand why the bios version that briefly shows the region select, but auto selects is not good enough? ” there are a lot of different people with unique preferences in this world. I think you can understand if you try a little harder. Some people run legitimate arcades, not home use. Some people compete in ultra high level tournaments. Some people, unfortunately, sell bootleg/conversion/modified games as originals to gain money. Some people don'…

  • CPS III Bios and CD Releases

    BlinG - - CPS III SuperBIOS

    Post

    I dont understand why the bios version that briefly shows the region select, but auto selects is not good enough?

  • Link monitors

    BlinG - - Monitor Help

    Post

    You need a VS kit or split the RGB signal on the jamma loom

  • CPS3 New User Help 3ST

    BlinG - - CPS III SuperBIOS

    Post

    What kind of power supply are you running in that cabinet?

  • CPS III Bios and CD Releases

    BlinG - - CPS III SuperBIOS

    Post

    Quote from eathis: “Quote from Darksoft: “As its indicated, it just removes the darksoft texts in first screen of all games. In Japan they will consider it a bootleg and wont be accepted for competitions otherwise. The bug with joystick is fixed and it requires bios update. When I have time to finish it, I'll release it. ” Please Darksoft, a version that directly boots on japanese version without opening the language select screen at all (even for a second) and without the darksoft text would be…

  • CPS2 multi woes

    BlinG - - CPS2 Multigame

    Post

    That happened to me and reseating everything fixed it. Hopefully it’s something simple like that for you as well