Search Results

I have no idea about this, sorry!

Artemio tested the DC now too: Transformer load or no load: 11.2V AC Rectifier Output: 13.17V DC Amps: 0.665 arcade-projects.com/forums/ind…ebd1273a02857d8a77b877590

Artemio tested three cabs under load and got 11.2V AC. He is going to test again at the smoothing cap (bypassing the bridge rectifier) to see what the DC reading would be too. arcade-projects.com/forums/ind…ebd1273a02857d8a77b877590

Quote from donluca: “Trust me, once you got the amp in your hands and know the specs of its components it's a matter of rustling through your PSU box to get the right one. ” So far, no one has it working with any PSU besides the original transformer.

Sorry to bring this up again, but does anyone have a solution for powering the PCB without the original transformer? So far, none of the documented voltages have worked for any of us trying to use our own PSUs.

Hmm, I guess the base pack has vhunt2. I'm trying to remember if there's a reason I went with that over vsav2, or is that an oversight?

Try another SD card first

Oh jeeze that looks awesome. Insane!

v4.1 is up to fix some files from an older pack that accidentally found their way back in.

Here's Namco System 12 (Ehrgeiz, Tekken 3, Soul Calibur) Tekken 3 / Namco System 12 - Recap And here is System 11 (Tekken 2) Tekken 2 / Namco System 11 - Recap Here is my Neo Geo CD-Z map/list console5.com/wiki/Neo_Geo_CDZ#Capacitor_List And the POW

Quote from rewrite: “Quote from SmokeMonster: “After reading a bit, you're definitely right that it's dangerous to use resistors for dropping voltage with high power sources like PSUs. I found what may be the perfect option though. Creative INSPIRE speakers took 13.5V AC (5A), and their PSU is cheap on eBay. It's model US-1450. Even though the PSU isn't labeled as AC output, I verified in a few different sources that it is in fact AC (not DC like most PSUs). I got one for $13/shipped. I can't te…

Quote from Frank_fjs: “And Cheng capacitors ” Can I use Rцкycons?

Quote from merrygoomba: “I got the Lion3s Plexi case and installed it today on my MV-1C,is there a way to fit the HAS without taking the bottom Plexi off the HAS like I had to do? ” My HAS doesn't come in contact with the plexi, so maybe Lions3 redesigned them? I would contact him because I think a lot of people would be disappointed by this.

v4.0 is up to add Pound for Pound

You can totally silence it with a fan speed controller.

I've updated the BASE pack with the CPS1/1.5 conversions.

I get all that stuff from eBay. You can search for 12V LED strip and then just measure how long you'll need. Or you can order them longer than you need and trim them with scissors.

@cruzlink2 overhauled the LCD selector list to fix some issues. I'm sure that wasn't fun to sort through, so a huge thank you to him for fixing it. I rebuilt the "Joystick Controls Only" list using his as the source too. Consider this an emergency update, I'm not coming out of retirement Here are the only two files that were changed, so no need to DL the entire pack to update: arcade-projects.com/forums/ind…ebd1273a02857d8a77b877590

That looks great, nice work. I saw one in person at AVGC and was blown away too.

Hopefully you grab them from the mirrors @xodaraP