What's new

plasia

Grand Master
Joined
May 5, 2016
Messages
815
Reaction score
575
Location
Mildura, Australia
Finally got around to setting up my Rear Projection CRT monster. Only to realise that there's a big slash in the screen. You can see it in this picture between the T and the S, it is far far worse when viewing straight on.

It seems to me like it should be replaceable, but I have no idea where to start finding a replacement...

Any advice/experience/pointers on doing this would be appreciated!

Hitachi C4678FS is the model
 

Attachments

  • IMG_20190810_163428754.jpg
    IMG_20190810_163428754.jpg
    304.5 KB · Views: 364
Last edited:
its not super hard on most units. the trouble is finding a replacement.

most of the time its a simple pop the front of and remove the old and put the new in.
Kinda like changing a fly screen on a window. Just with a pinch of death by electricity.
 
its not super hard on most units. the trouble is finding a replacement.

most of the time its a simple pop the front of and remove the old and put the new in.
Kinda like changing a fly screen on a window. Just with a pinch of death by electricity.
Yeah I figured it'd be something like that :(

Hoping someone has some answers/clues of where to find.
 
Shoot me the modal number and I'll see what I can find
 
I'd be very grateful. Should have included the model number in my OP. I'll fix that when I get home.
 
Back
Top