510NSB22A matsushita

[Ravenwing]

hi. Bought a 510NSB22A MATSUSHITA monitor to replace the one in my arcade table that got busted when moving. The new monitor has 10 pins on the neckboard but the original has 12. Anyone got any ideas so I can get it going again please

 

[PascalP]

First of all welcome to the forum, you can introduce yourself here
https://www.arcade-projects.com/forums/index.php?forums/introduce-yourself.56/

Second, you can post these type of questions in the correct location, like here:
https://www.arcade-projects.com/forums/index.php?forums/monitor-help.6/

Third, I think you are out of luck and need to source a tube which actually is compatible with your neckboard

 

[Rg111]

Hello Raven, I dont care where you post your info or how you introduce yourself.

I concur with PascalP on the monitor. What kind of chassis do you have?

 

[Ravenwing]

I'm kinda new to this so not sure how to ID the chassis.

The number off the original monitor is
A48QAD220X

 

[nem]

That's just a tube number.

You need to take a pic of the chassis.

Anyway, the neck connector on your new replacement tube is wrong. You need to find a different tube.

EDIT: does your monitor match this:

https://www.ebay.com/itm/153561197523

 

[Ravenwing]

yeah
Same tube but vertical mount in cocktail table