S18 : Shadow Dancer 171-5987 patch (romboard with the 315-5436 custom chip like Clutch Hitter, etc)

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • S18 : Shadow Dancer 171-5987 patch (romboard with the 315-5436 custom chip like Clutch Hitter, etc)

      I did this hack for my good friend @lorenzo2mars in order for him to convert a Clutch Hitter romboard to Shadow Dancer.
      In other words this hack allows to convert newer romboards (with the 315-5436 custom chip) to Shadow Dancer.

      I've used romset shdancer, simply use files from this set except for ROMs A5/A6 where you must use my patched files:
      filedropper.com/sdanyromboard

      1) ROMs types:

      A6 -> 27C2001/27C020
      A5 -> 27C2001/27C020
      B1 -> 27C2001/27C020
      B2 -> 27C2001/27C020
      B3 -> 27C2001/27C020
      B11 -> 27C2001/27C020
      A11 -> 27C2001/27C020
      B10 -> 27C2001/27C020
      A10 -> 27C2001/27C020
      B9 -> 27C2001/27C020
      A9 -> 27C2001/27C020
      B8 -> 27C2001/27C020
      A8 -> 27C2001/27C020
      A4 -> 27C100/27C1000 - NON JEDEC!
      B4 -> 27C2001/27C020

      That's 14 * 27C2001/27C020 and 1 * 27C100/27C1000 needed.

      2) ROMs positions

      Use this conversion table:

      Left OG position on 5874, right corresponding position on 5987
      A6 -> A4
      A5 -> A6
      B1 -> B1
      B2 -> B2
      B3 -> B3
      B11 -> B10
      A11 -> A10
      B10 -> B11
      A10 -> A11
      B9 -> B12
      A9 -> A12
      B8 -> B13
      A8 -> A13
      A4 -> B7
      B4 -> B6

      3) Jumpers settings

      2/4/5/8/10/11
      18/14/16/19
      25/21/23/28
      29/31/33/35/37/39/41/43
      45/47/49/51
      66/68/69/71
      Looking for:
      - Sega Super Scaler hardware (Out Run, Model X, Model Y), not working (even with faulty PCM chip)



      01010011 01000101 01000011 01010010 01000101 01010100 00100000 01001101 01000101 01001110 01010101 00100000 01000111 01010101 01011001

      The post was edited 1 time, last by Apocalypse ().

    • Maybe it's because everyone is still on vacation, I'm sure a lot of other people will be glad to see this conversion! :)

      This morning I've tried your conversion!
      Initially I had some issues (NOT related to your work).
      It sounds strange to me but the B1 rom that is used for audio was generating some garbage on the background (mostly black pixels) due to some ossidation on the pins (it took me 3 hours to figure out the issue :whistling: ).
      I still have some black pixels that show for a second when the shōji is opening or closing (for example at the end of the levels) but during the gameplay it seems everything right.

      This conversion is really a very cool present to the comunity. Thanks for doing that and thanks for sharing it with us! :thumbup: :thumbup: :thumbup:

      The post was edited 1 time, last by sk8er000 ().

    • sk8er000 wrote:

      Maybe it's because everyone is still on vacation, I'm sure a lot of other people will be glad to see this conversion! :)

      This morning I've tried your conversion!
      Initially I had some issues (NOT related to your work).
      It sounds strange to me but the B1 rom that is used for audio was generating some garbage on the background (mostly black pixels) due to some ossidation on the pins (it took me 3 hours to figure out the issue :whistling: ).
      I still have some black pixels that show for a second when the shōji is opening or closing (for example at the end of the levels) but during the gameplay it seems everything right.

      This conversion is really a very cool present to the comunity. Thanks for doing that and thanks for sharing it with us! :thumbup: :thumbup: :thumbup:
      Enjoy it !
      @Apocalypse made a great job for arcade community (as usual)
      Multis
      CPS 1 (Aje) / 2 & 3 / 1.5 (chinese)
      Taito F3
      MVS
      Sega C2
      Irem M72
      Sega S16B
    • I'll gladly like to try this until the multi is released ^^ hope i'll source the needed chips soon to try it. (i have on hands 10 x M27C2001) . i still need 4 of them (i think i can reuse some from the cluch hitter game + 27C100) . Thanks for this chance sir !
      Multi's: CPS2 / Taito F3 / Irem M72
      Superguns : HAS v3.1
      Scalers : OSSC v1.6 / RetroTINK-2X
      Scart switch : Gscartsw V5.2
      JNX: Spitfire
      NAC: Splitfire





      My Arcade Stuff

      [nes-101] [pce] [genesis] [segacd] [neogeo] [snes] [saturn] [psx] [n64] [gamecube] [dreamcast_ss]

      The post was edited 5 times, last by AlxUnderBase ().

    • New

      Thank you,Apocalypse for this awesome gift and for your lessons about everything !
      Thank you, sk8er000 for your effort,helps me alot ^^
      Ps : The jumper settings are the same as on Moonwalker Conversion

      The conversion working great with my System18 motherboard + rom board

      Images
      • IMG_20200117_105628_resized_20200117_105912235.jpg

        604.51 kB, 1,824×1,368, viewed 9 times
      • IMG_20200117_105748_resized_20200117_105912612.jpg

        313.14 kB, 1,562×954, viewed 10 times
      Multi's: CPS2 / Taito F3 / Irem M72
      Superguns : HAS v3.1
      Scalers : OSSC v1.6 / RetroTINK-2X
      Scart switch : Gscartsw V5.2
      JNX: Spitfire
      NAC: Splitfire





      My Arcade Stuff

      [nes-101] [pce] [genesis] [segacd] [neogeo] [snes] [saturn] [psx] [n64] [gamecube] [dreamcast_ss]

      The post was edited 1 time, last by AlxUnderBase ().

    • New

      xtrasmiley wrote:

      Wow, nice. Is the game as good as people think it is?
      Yes,Mo ... For me and my brother,is an awesome release . i didn't have the chance too much when i was child to play it on the arcades , only the first Shinobi i meet it on the arcades rooms ... not this one.
      Multi's: CPS2 / Taito F3 / Irem M72
      Superguns : HAS v3.1
      Scalers : OSSC v1.6 / RetroTINK-2X
      Scart switch : Gscartsw V5.2
      JNX: Spitfire
      NAC: Splitfire





      My Arcade Stuff

      [nes-101] [pce] [genesis] [segacd] [neogeo] [snes] [saturn] [psx] [n64] [gamecube] [dreamcast_ss]
    • New

      xtrasmiley wrote:

      Same here. Only the first Shinobi which is awesome. I may have to try this conversion, but to be honest, I was waiting for a multi to come out! :P
      The chips was in hands from March 2019 , so i didn't loose too much , besides that, i can use my uv eraser from China and i can reuse them on other aplications if will be another aplications witch require these 2001 & 020 chips :whistling:
      Multi's: CPS2 / Taito F3 / Irem M72
      Superguns : HAS v3.1
      Scalers : OSSC v1.6 / RetroTINK-2X
      Scart switch : Gscartsw V5.2
      JNX: Spitfire
      NAC: Splitfire





      My Arcade Stuff

      [nes-101] [pce] [genesis] [segacd] [neogeo] [snes] [saturn] [psx] [n64] [gamecube] [dreamcast_ss]