wolffworkshop
Student
Hi all, I'm hoping someone can help me with an issue i'm having regarding my original Golden Axe board. I'm in the process of building a cab and have just got the prototype cab built and running at the moment. I'm building it to enable me to swap between three main boards: Golden Axe RODA, Street Fighter 2 CE & WW and a NEO GEO MV1A board. The NEO GEO looks as normal on my VGA monitor (excuse the poor player shot, you can't photograph and play) my Streetfighter looks ok other than a board A graphics issue, but the Golden Axe looks, as per the photo completely blown out. These are the same settings across the monitor for contrast etc. It looks as though the signal needs a few resistors on it to knock it down but I'm not sure how best to do that. All boards look as they should on a SONY BVM and any other CRT just this! Any help or suggestions would be gratefully received. Ben Wolff
