HI,
I have two chassis:
1. Nanao MS8-18A with its original Nanao neckboard.
2. Nanao MS8-18FB with a Toei neckboard.
There are two differences between the neckboards connectics on each chassis:
- The Nanao neckboard does have an additional wire (G1) that the Toei neckboard don't have.
- The MS8-18FB chassis connectors are linked togheter by a wire (8/4). I guess that link is for replace the missing G1...
Can I swap the neckboards with that new wiring like on the 2nd shema?
THANKS!!
p.s. do I risk a fire or an explosion, or do I only risk to shortcut the neckboard, or also the main board?
I have two chassis:
1. Nanao MS8-18A with its original Nanao neckboard.
2. Nanao MS8-18FB with a Toei neckboard.
There are two differences between the neckboards connectics on each chassis:
- The Nanao neckboard does have an additional wire (G1) that the Toei neckboard don't have.
- The MS8-18FB chassis connectors are linked togheter by a wire (8/4). I guess that link is for replace the missing G1...
Can I swap the neckboards with that new wiring like on the 2nd shema?
THANKS!!
p.s. do I risk a fire or an explosion, or do I only risk to shortcut the neckboard, or also the main board?
Attachments
Last edited: