What's new

erzane

Professional
Joined
Aug 29, 2018
Messages
321
Reaction score
114
Location
CH
Hi guys,
I'd like to know if this shema is correct. Also, should I use 18awg, maybe 22awg is too thin?
About the connector: what's happend if, when I turn-on the cab/monitor, the connectors are disconnect like in this shema? I know it do not have any sens to make this wiring and leave it disconnected, but I'd like to know what kind of effect it will occurs on resolution, also maybe it can do a short-circuit, or totaly safe?
Thanks!!
 

Attachments

  • Wide-narrow connector.jpg
    Wide-narrow connector.jpg
    926.5 KB · Views: 241
Last edited:
I believe that this should always be connected to one or the other and that you shouldn't switch it with the monitor powered on. I wouldn't put a switch on it just like I wouldn't put one on the yoke connectors. It's just too easy for someone to flip it while the chassis is running and damage it.
 
Back
Top