Hi guys, I recently purchased the cps2 multi from high score saves and cant get it to display anything other then a white screen. Ive tried installing the kit on two different boards (rev6 & 7) with the same results. Its currently installed on a rev 7 board With a g pal installed. I double checked the jumpers which match the installation vid. My voltage is at 5.17v. I have the key writing wires connected and tested continuity with a multi meter. Also checked continuity on the two pcbs for the kit. Im using an 8g sandisk that came with it. The lcd display shows the game name and says have fun. During the writing process the screen goes black then returns to white after its done loading a game. Any help would be greatly appreciated. Not really sure what to do from here.