I have the Capcom I/O board. All the sudden the NAOMI has decided to give me this error. I am sure to make sure all the connections are made (USB, Audio, Power, Video). I have swapped out the USB cable. I have cleaned the I/O edge connector. I have removed the top half of the case to expose/access the 2nd USB port. Still I get the same error. I must say that there has been a recent period where I could not get power to the NAOMI through the Capcom I/O JAMMA connector.
Anyone have experience with this issue and was able to solve it? I suspect it may be a power supply issue, but I won't be able to test that until the JST connectors come in. I also have another NAOMI board coming in with an different I/O board. But I would hate it if my current I/O board is bad since it is the Capcom board.
Anyone have experience with this issue and was able to solve it? I suspect it may be a power supply issue, but I won't be able to test that until the JST connectors come in. I also have another NAOMI board coming in with an different I/O board. But I would hate it if my current I/O board is bad since it is the Capcom board.