Broken plastic assembly maintaining rings (convergence issues)

[twistedsymphony]

Resin printing would be best but if you're going to FDM print it then ABS or Nylon (if your machine is capable) would be ideal.

 

[nem]

Hunting for CRTs has become nearly impossible here, yet finding one with the correct neck size is a pain.

What's the diameter of the neck?

 

[Apocalypse]

What's the diameter of the neck?

I thought I wrote it before, maybe not.

Neck diameter is 29.5mm

 

[nem]

You did. My mistake, I skipped over it.

Since Zenith is an American brand, look up guys from the US that regularly pick at recycling centers. A tube number will narrow down the search. The number is on the sticker on the tube. If it's 25" American, it should start with A63.

 

[Apocalypse]

You did. My mistake, I skipped over it.

Since Zenith is an American brand, look up guys from the US that regularly pick at recycling centers. A tube number will narrow down the search. The number is on the sticker on the tube. If it's 25" American, it should start with A63.

Yes as stated in the first post it's a US tube, and you're right about the A63 in the reference:

 

[Apocalypse]

@jamesv833 sent me a convergence assembly from a different tube but with the same neck diameter. Rings order and number of poles are also identical.

Will report when I'll reassemble the PSUs but I'm pretty confident it will work great.

 

[Darksoft]

That's the spirit. Kudos to @jamesv833

 

[Apocalypse]

That's the spirit. Kudos to @jamesv833

Yes, many thanks to him again.