A friend of mine in another state has two pm1745 monitors from Time Crisis 3 that he wants to sell but they are untested and he is willing to test them. It looks like the chassis has some sort of molex connector for the video output. I wanted to maybe try craftymech’s test pattern generator but I don’t have one yet and don’t know if there is a connector or I would have to plug into the chassis somewhere else to test it. I can see ac and ground and rgb on the molex pinout. Should I just have him create a connector? Basically any advice on how to get power and video to test is appreciated.
- Thread starter midwaydj
- Start date
It looks like this is the correct housing and maybe I could wire ac and gnd to this connector from a pc power cable into this housing. It also looks like a 6 pin connector on the chassis I could tap into with the test pattern generator?
https://www.waytekwire.com/item/38612/Molex-50-84-1120-MLX-12-Pin-Power-Connector/
https://www.waytekwire.com/item/38612/Molex-50-84-1120-MLX-12-Pin-Power-Connector/
