What's new

jermz1

Grand Master
Joined
Dec 2, 2017
Messages
459
Reaction score
599
Location
South Korea
UPDATE! I'm extremely low on black and red. I'm out of new condition ones. All I have left are imperfect ones that have light scratches, polish burns,tiny chips and artwork defects. I will be selling those for half price $20.


I still have a good amount of blue, both variants.




Been working on a sub panel for my chewlix. After some back n forth locally I was bit satisfied and outsourced overseas.
Finally got them in the mail today, I am impressed with the way they came out.

https://ibb.co/CVK49k4
https://ibb.co/sH4vQpS
https://ibb.co/WHMwWrT
https://ibb.co/Wy5Z3kQ
https://ibb.co/ypPZZLR
https://ibb.co/bbMyTcy
https://ibb.co/Lz1v2WK
https://ibb.co/LvRfbLQ
https://ibb.co/ZWr5KKd
https://ibb.co/ZWxWyRV
https://ibb.co/9HHCdtw
https://ibb.co/St1gjSB
https://ibb.co/sqp53rt
https://ibb.co/6XVhGH8
https://ibb.co/TPCgfJZ
https://ibb.co/KzRDPL8
https://ibb.co/3dwtkLY
https://ibb.co/jMkM9jL
https://ibb.co/x7XQLmn
https://ibb.co/58Js95t
https://ibb.co/b5jtTQV
https://ibb.co/WkJWwj3
https://ibb.co/B3hj4XV
https://ibb.co/F64m0d8
https://ibb.co/j5vTzkc
https://ibb.co/Vw1VXN9
https://ibb.co/7yt3vNn
https://ibb.co/5LcB71y
https://ibb.co/fC9j8Rq
https://ibb.co/Sdf8LDW
https://ibb.co/59Z2Cvk
https://ibb.co/L0ZbTpk

$40 Per Panel
U.S. Shipping Options
$8.40 Priority Flat Rate Bubble Envelope (Can fit 2 panels in Envelope to save on shipping)
$15.05 Priority Medium Flat Rate Box ( 3 or more panels)

International Shipping Options
$35.65 Priority Flat Rate Bubble Envelope (Can fit 2 panels in Envelope)
$71.75 Priority Medium Flat Rate Box ( 3 or more panels)

Components needed for panel.
4 - M4-.70x10 Metric Pan Phillips Machine (screws)
4 - M4-.70 Nuts
6 - 30mm buttons
2 - USB MOUNT
1 - Volume Knob
1 - Volume Controller Must remove housing.
1 - Rubber Grommet

List of who i am tracking that wants one.
Confirmed folks will have the panel reserved. Undecided folks will
be on a FCFS basis.
See Below
 

Attachments

  • A-P Orders.PNG
    A-P Orders.PNG
    38 KB · Views: 2,906
Last edited:
I like this style .. however the button labels don't quite fit what I need :(

I need something more like...

P1 Coin .. P1 Service .. Exit .. P2 Coin .. P2 Service .. Test
 
Thanks, in what color would you need it in.
I'll see if I could squeeze in a alt design within the next small run.
 
I like this style .. however the button labels don't quite fit what I need :(

I need something more like...

P1 Coin .. P1 Service .. Exit .. P2 Coin .. P2 Service .. Test
^ This, or do a run with no labels at all.
 
pretty cool! I would also prefer no labels over this, as I don’t use a ps4 in my vewlix and like to keep it generic.
the volume button is fantastic. Will you sell it as a kit? (Knob unit, USB’s) ?
 
I
I like this style .. however the button labels don't quite fit what I need :(

I need something more like...

P1 Coin .. P1 Service .. Exit .. P2 Coin .. P2 Service .. Test
In for this ^
 
Oh I would like a Red one with no labels too and the volume pot, knob if you can ?
 
pretty cool! I would also prefer no labels over this, as I don’t use a ps4 in my vewlix and like to keep it generic.
the volume button is fantastic. Will you sell it as a kit? (Knob unit, USB’s) ?
sorry I will not be selling any kits rights now. Just the panel itself,no buttons,usbs, volume pot.
 
Thanks, in what color would you need it in.
I'll see if I could squeeze in a alt design within the next small run.
I think the blue would match my blue cab
LVAmcgzl.jpg


I also have a red cab coming that supposed to match the red in this picture
730Dhmdl.jpg


.. or do I go with grey / black to match the existing CP? Gah decisions :(

I would almost want a no label one except I am digging how the 1p and 2p fonts look on the home buttons.

How much are you thinking on fully loaded out per panel? Or a not so loaded panel and point me to what fits.
 
Last edited:
sorry I will not be selling any kits rights now. Just the panel itself,no buttons,usbs, volume pot.
Could you link to the parts you used for the volume pot/knob and the USB’s with mounting?

I’d buy one with your labeling, for console buttons, and one without labels for normal play. I like the design!
 
that looks really nice...id pick one up! did you consider including a spot for a headphone jack
 
@ekorz USB MOUNT , VOLUME KNOB

What colors were you looking at with and without label? Thanks, I've had an headache perfecting it.
I’d go for a red and a black. Either look like they’d work on my FC. Of course it depends on your stock, and plans for a no-labels design (or the labels @Dreygor suggested). That feels like it would work for normal arcade play. It’s a shame to print no labels since they look very nice in the design. Maybe folks here can agree on their preferred alts.

So if you print a run of alt/no labels in black, I’d take a stock red. Or vice versa.

Thanks for the part links, I’m sure everyone would want them. Maybe also link us the pot under the knob, and any other non-button parts (screws/bolts?), so people can get the build right.
 
@Dreygor I'm not selling a loaded panel just the panel itself. I'm looking at $35-40.
@ekorz USB MOUNT , VOLUME KNOB
What colors were you looking at with and without label? Thanks, I've had an headache perfecting it.
After mulling on it I am in for two of the black/grey ones since that's the actual color of my control panels.

Did you decide if you are doing the blanks or with the "P1 Coin .. P1 Service .. Exit .. P2 Coin .. P2 Service .. Test" labels ?
 
Im in for a red and a black with no labels for the buttons since I dont quite know what I want to use them for yet.
 
Last edited:
@streetlights no i did not since there is a usb port. Found it tedious to try and add that to the panel.
@ekorz no problem ill edit the first post with a complete part list.
@Dreygor im leaning towards a no label since more people want that.
@Derick2k okay cool
I will compile a list until Saturday night hawaii time, Finalize Sunday and order Monday.
 
This is very cool and great work. I have the heartcade one which just blends in because it's black. I really like the matched theme that this does. What I would really like is this same thing that covers both accessory panels since I never plan on using a bill acceptor or nesica rfID. It looks more centered that in my opinion. Not to take away from this at all though. Very sexy.

For the different colors, does the plexi color itself change or is it just the back art? Does the back art adhere do the panel or just rest against? Great job! I'm on the fence cause of current financial situation but leaning heavily to wanting one.
 
@Aval0n I actually have been thinking about that for some time now. Its possible I may make that later.
The art is UV reversed printed onto the plexi.
Thanks!
 
Back
Top