Advice on project cases?

[rewrite]

I need a couple project boxes.

One for my virtualtap and one for some convenient little supergun for test bench purposes.

Everything I'm finding looks like some awful plastic thing you'd buy at radio shack in the 90s...

Anything not janky looking out there? Maybe metal?

 

[kuze]

Hammond makes good stuff and their products are on DigiKey and some stuff on Amazon

https://www.hammfg.com/electronics/small-case

 

[rewrite]

Hammond makes good stuff and their products are on DigiKey and some stuff on Amazon

https://www.hammfg.com/electronics/small-case

Thanks. Looks like they have a couple decent looking ones.

Funny enough they're responsible for the exact ugly case I was thinking of when I made this thread.

 

[kuze]

Np, their site is a bit lacking but if you check around a bit they do have some nice stuff

 

[West]

Thx for throwing that's link up @kuze. I have too many projects in crappy plastic. Might be time to upgrade.

These might make decent stick cases.
https://www.hammfg.com/electronics/small-case/general-purpose/1456cww

 

[rewrite]

Thx for throwing that's link up @kuze. I have too many projects in crappy plastic. Might be time to upgrade.

These might make decent stick cases.
https://www.hammfg.com/electronics/small-case/general-purpose/1456cww

Those look similar to the case for some sticks @theoddtech made.

 

[theoddtech]

Very similar, these are the exact ones I used https://www.mouser.com/ProductDetail/546-1456PH1BKBU

 

[ita123]

I have purchased this one - https://www.aliexpress.com/item/32967392384.html
Metal case with plastic panels,
Im planning to put inside frank's minigun Supergun and a psu.