the Goat Grand Master Joined Dec 7, 2018 Messages 836 Reaction score 683 Location Vermont, USA Nov 10, 2019 #1 The instructions PDF say in order to get the lid to fit you need to remove one support post from the case lid. I removed the support post. But the lid still will not fit with the LCD ribbon cable plugged in. What is the deal?
The instructions PDF say in order to get the lid to fit you need to remove one support post from the case lid. I removed the support post. But the lid still will not fit with the LCD ribbon cable plugged in. What is the deal?
syntax_X Student Joined May 9, 2018 Messages 56 Reaction score 64 Location Australia Nov 10, 2019 #2 Take the little top bit of plastic off the ribbon cable, mine was fouling by that couple of mm. I super glued it together.
Take the little top bit of plastic off the ribbon cable, mine was fouling by that couple of mm. I super glued it together.
the Goat Grand Master Joined Dec 7, 2018 Messages 836 Reaction score 683 Location Vermont, USA Nov 10, 2019 #3 syntax_X said: Take the little top bit of plastic off the ribbon cable, mine was fouling by that couple of mm. Click to expand... Thanks. That worked. My CPS2 is all buttoned now.
syntax_X said: Take the little top bit of plastic off the ribbon cable, mine was fouling by that couple of mm. Click to expand... Thanks. That worked. My CPS2 is all buttoned now.