Pre-Order For Capcom Mini Cute Production

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Thanks to @rewrite to asnwer all question . :saint:
      I will ask to UPS and Fedex for the shipping cost also.

      The main idea was to get payment %30 of deposite for the production. Then get the rest when the production completed. But the payment method must be Bank Transfer.

      We talked about it today with @rewrite . I know it seems not good to ask Bank transfer but there are some problems with paypal

      1- Paypal Banned Turkey. Thats why im using my friend's paypal account in Hong Kong.
      2- My most expensive product is 175 USD CPS2 Case. If i get the payment by paypal 1000-1500 USD around, they will block the acccount, which , i really dont want this.
      3- There is a money transfer limit HK to Turkey
      4- When i ship the cabinet to USA or another country, Turkey Custom asks to me Bank Receipt to import that. They dont agree the paypal receipt because of the Banned situation.

      So the only way to make this real is looks like Bank Transfer. Thats why i always want a Distributor .
      I know USA people are not welcome to send money by bank. They think as SCAM .

      Lets see how many people agree to Bank Transfer. Then i will make a plan about it
      Welcome to My Discord Server: discord.gg/VjA7sk6
      Talk about all arcade staff.... ;)
    • I'll probably be seeing about managing the money for the order, since I can send everything as a single bank transfer. Depending on when we do this and how much, I'll just get it taken care of. All my expendable funds were stripped but I'd still like to see this work if we can manage it. I'll talk to @hursit and see what we'd need to get a container loaded.
      Be attitude for gains . . .

      1 : Be praying
      2 : Be praying
      3 : Be praying
    • Epyc wrote:

      Can these monitors be purchased brand new?
      It's 2020 my friend. CRT's haven't been made in a decade ish. Sure, you can sometimes find an NOS monitor here or there, but they're neither common or cheap.

      What's been tested is 19" WG's.
      On the hunt for: Dinoking, Mushiking, Love & Berry, Egret 29, and an SNK SC-25.

      Shameless plug: Rewrite's Recaps - Your monitor and PSU recapping service center
    • rewrite wrote:

      Epyc wrote:

      Can these monitors be purchased brand new?
      It's 2020 my friend. CRT's haven't been made in a decade ish. Sure, you can sometimes find an NOS monitor here or there, but they're neither common or cheap.
      What's been tested is 19" WG's.
      I figured. Thought I’d ask since I did see New Makvision Arcade monitors for sale still. Wasn’t sure if there were other new CRT’s out there.
    • Epyc wrote:

      Wasn’t sure if there were other new CRT’s out there.
      Not readily available AFAIK. Just the Maks. I'm sure there are hundreds or thousands of NOS monitors out there, but all spread out and only pop up now and again.
      On the hunt for: Dinoking, Mushiking, Love & Berry, Egret 29, and an SNK SC-25.

      Shameless plug: Rewrite's Recaps - Your monitor and PSU recapping service center
    • Coyo5050 wrote:

      @Derick2k curious what scanner you use? I have a Color Muse which was like $60 on Amazon to match house paint (inside and outside) and it does an amazing job considering how cheap it is.
      Before I had borrow a scanner from autobody shop. But I recently got the Spectro 1 (made by the same company as the muse), seems to be about as accurate as the autobody shop one, but it does come up with a couple different results on the same paint.


      Wanted: PCBs - Batsugun, Battle Garegga, Battle Bakraid
      Other stuff - 19" Monitor/chassis and/or WG K7000 Chassis
      Vewlix Shipping Brackets (2x sets of the red ones would be nice)
      High End Headphones/Desktop Headphone Amps/DACs as well.
      If you have any of these for sale/trade let me know :thumbup:
    • Alright, i will send of scanner to @rewrite to get color code.

      I thinks its best we use @Cereth to collect payment on USA orders?!
      And hopefully it will be a containers worth and have him deal with distribution/shipping.
      Everyone agree??

      Anyone have a coinmech that they can send Hursit?? i dont have the cabs anymore, if not I would do it.

      @hursit Are the cabs gonna be supplied complete or shell?? Meaning jamma harness, speakers, psu etc...

      BTW - these speakers are basically drop in replacements for the originals, are magnetically shielded, etc..

      monacor.com/products/component…range-speakers-/sp-10-4s/


      Wanted: PCBs - Batsugun, Battle Garegga, Battle Bakraid
      Other stuff - 19" Monitor/chassis and/or WG K7000 Chassis
      Vewlix Shipping Brackets (2x sets of the red ones would be nice)
      High End Headphones/Desktop Headphone Amps/DACs as well.
      If you have any of these for sale/trade let me know :thumbup:
    • Derick2k wrote:

      Anyone have a coinmech that they can send Hursit?? i dont have the cabs anymore, if not I would do it.
      I've got one I can send when the whole global pandemic messing up shipping thing calms down.

      And please wait till the protests/riots are over before shipping anything to me, most of my mail goes through LA.
      On the hunt for: Dinoking, Mushiking, Love & Berry, Egret 29, and an SNK SC-25.

      Shameless plug: Rewrite's Recaps - Your monitor and PSU recapping service center
    • Pretty much my plan is:

      1) I will pay Hursit the deposit to start production on the first 40 units (20ft container). If orders look like we'll fill a 40ft, I'll make a 2nd deposit later.

      2) Once the deposit is made, I'll start collecting info and payments from people, and will manage the personal interaction start to finish like I do with all my other sales. Production time is roughly 3 months, that is the amount of time you will have to pay in full.

      3) Nearing end of production, I will pay Hursit the remaining balance, arrange the container to ship, and handle distribution when they arrive.

      I'm starting to ask around and see if there's any way we can get a stock of 19" monitors, but more than likely it will not happen. I'll also probably set up a standardized order form on my website (WIP) that you can put in your information and order from, that way I can manage everyone from the same place, regardless of what forum or Facebook group you are from.
      Be attitude for gains . . .

      1 : Be praying
      2 : Be praying
      3 : Be praying
    • Cereth wrote:

      I'm starting to ask around and see if there's any way we can get a stock of 19" monitors, but more than likely it will not happen.
      And I've offered to help refurb/install these if we can find a large enough stock.


      benime wrote:

      I'm still in but to @Derick2k's point, we need to know what all is included with the cab.
      Maybe ten posts ago:

      No:
      power supply
      buttons
      joysticks
      monitor
      coin MECH

      Yes:
      METAL case with pleksi glass, and wire harnesses and the rest
      On the hunt for: Dinoking, Mushiking, Love & Berry, Egret 29, and an SNK SC-25.

      Shameless plug: Rewrite's Recaps - Your monitor and PSU recapping service center
    • Derick2k wrote:

      Alright, i will send of scanner to @rewrite to get color code.

      I thinks its best we use @Cereth to collect payment on USA orders?!
      And hopefully it will be a containers worth and have him deal with distribution/shipping.
      Everyone agree??

      Anyone have a coinmech that they can send Hursit?? i dont have the cabs anymore, if not I would do it.

      @hursit Are the cabs gonna be supplied complete or shell?? Meaning jamma harness, speakers, psu etc...

      BTW - these speakers are basically drop in replacements for the originals, are magnetically shielded, etc..

      monacor.com/products/component…range-speakers-/sp-10-4s/

      benime wrote:

      I'm still in but to @Derick2k's point, we need to know what all is included with the cab.

      Wiring? Speakers? Panel? Overlay? PSU?
      These are included

      Metal Shell
      Pleksi Glass
      Wire Harness
      Panel Layout Sticker
      Side Arts and other arts.
      Locks
      Wheels and balance feet


      But

      These are not included
      button
      Joystick
      Monitor
      PSU
      Coin Mech ( Not Metal parts, only Asahi Seiko Mech )
      Speaker ( I can put the cheaper one, cant find the original one. Importing some staff to Turkey is very hard nowadays. Sorry about that )


      Cereth wrote:

      Pretty much my plan is:

      1) I will pay Hursit the deposit to start production on the first 40 units (20ft container). If orders look like we'll fill a 40ft, I'll make a 2nd deposit later.

      2) Once the deposit is made, I'll start collecting info and payments from people, and will manage the personal interaction start to finish like I do with all my other sales. Production time is roughly 3 months, that is the amount of time you will have to pay in full.

      3) Nearing end of production, I will pay Hursit the remaining balance, arrange the container to ship, and handle distribution when they arrive.

      I'm starting to ask around and see if there's any way we can get a stock of 19" monitors, but more than likely it will not happen. I'll also probably set up a standardized order form on my website (WIP) that you can put in your information and order from, that way I can manage everyone from the same place, regardless of what forum or Facebook group you are from.
      Yeah this is the plan we have talked about it ;)
      Welcome to My Discord Server: discord.gg/VjA7sk6
      Talk about all arcade staff.... ;)
    • rewrite wrote:

      No:
      power supply
      buttons
      joysticks
      monitor
      coin MECH

      Yes:
      METAL case with pleksi glass, and wire harnesses and the rest
      Missed it, Im cool with that :D


      Wanted: PCBs - Batsugun, Battle Garegga, Battle Bakraid
      Other stuff - 19" Monitor/chassis and/or WG K7000 Chassis
      Vewlix Shipping Brackets (2x sets of the red ones would be nice)
      High End Headphones/Desktop Headphone Amps/DACs as well.
      If you have any of these for sale/trade let me know :thumbup:
    • What would really help would be someone who knows their way around modding RGB TVs and connecting them to RGBS on the fingerboard and then attenuating.

      I found 4 19” composites at my small town dump to give you an idea of the excess.

      That way we don’t have to rely on worn tubes and get some of those like new old people RV tv’s going.

      It’s a tall order but breaking the knowledge barrier in this forum through a group effort would help.

      I have a few people in mind but they are super busy and would probably not be able to help.