What's new

yosoyrune

Student
Joined
Jun 8, 2017
Messages
50
Reaction score
6
Hello,

I would like to know how to convert a Hammerin' Harry M84 IREM board to an R-Type II.

Is any hacked ROM needed? Any wiring or something else?

Kind regards.
 
I have seen your video ! Amazing job! Excellent!!

So, I only need to do this in the M84 board??

"Think i found it!!
There is lines 3 switched on the [top board] pal!!!"




 
Nothing stopping you getting the pcb in a 'ready state' it's not a quick job.
The roms all need putting in sockets and testing again with hammerin harry - so you know there is no errors on the soldering.

There is no wire mods etc.
 
I got an M84 Hammerin' Harry PCB, so how many ROMs are needed for the conversion?
 
I got an M84 Hammerin' Harry PCB, so how many ROMs are needed for the conversion?
You want all 12 games on the switch yes? it's a LOT of 27c801's ;)
@Hammy, I have seen you could convert to a Ninja Spirit.

Can it be done with an M84 too? Thanks.
All 12 irem v25 games, there's 3 left to do and a few that need the finishing touches.
It will be worth the wait trust.
 
  • Like
Reactions: nem
I'm thinking on this two conversions: R-Type II or Ninja Spirit...

Do you mean that 12 games can be stored in a board??? I think I missunderstood it, don't you?
 
Back
Top