256 doesn't Boot

[DJLC]

I got a 256 system that was bought as untested and I'm wondering if there's a way to save it.

It doesn't beep when booting, I get nothing on the screen, the fan doesn't spin, and I cannot operate the DVD drive.

However, the LEDs on the front glow (memory card and power).

Is this board dead or can it be saved.

 

[ArcSys101]

Clean the memory card

If the i/o board yellow light is blinking fast adjust the voltage of the power supply

If your booting it in the lcd or led tv monitor.via vga dipswitch 2/3/4 all in On position

If via cabinet on crt let all dipswitch on off position

Is your i/o boqrd has the loex connected to the i/o going to the system?

 

[DJLC]

The IO board was green I believe. The Power Light was red.

I know the setup works since I've got a working 256 that boots just fine using the same media/settings.

 

[ArcSys101]

Dead board maybe

 

[Hydreigon]

Is the motherboard getting any power (any LEDS light on the motherboard itself)? Fan working? Looks like some power issue or something isn't seated properly.