I saw some people fixed this by holding VOL down on boot or shorting the cap on CC18, however, I tried both of these (I held vol down until the region warning came up and I tried to short the pads on the underside of cc18 as the top part did not look like the pictures I found online. It looked like this https://imgur.com/a/Py1kRU7). I'm not sure what else to try. I know it's not my cab as switching the rca channels changes which speaker the audio comes out of.
Not sure what else to try. I saw someone mentioned his darksoft board B board would only do mono while a regular B board would do stereo in an old post. I only have my darksoft board so I'm not able to test another on it. Is there something on the kit that can cause that?
Not sure what else to try. I saw someone mentioned his darksoft board B board would only do mono while a regular B board would do stereo in an old post. I only have my darksoft board so I'm not able to test another on it. Is there something on the kit that can cause that?
