SpiritSaiyan
Student
Hi, new here. I recently picked up a Tekken 5 cab that works fine (just needs aesthetic work) with the intention of converting it into a Soul Calibur II cabinet.
I swapped out the T5 disc and dongle for SC2's disc and 2 dongles, and made sure to swap the jumper pins on the board to get into 246+ mode. When turning on the cab, the monitor comes on but stays black. No sound at all. LEDs on the 256 are on as well as the IO board. Disc drive activity light comes blinks for a few seconds, then I hear the drive spin, then both stop. Nothing else from that point on.
To make sure I didn't do something wrong, I did everything in reverse and Tekken 5 still boots normal. Is it possible that the drive isn't compatible? I saw Soul Calibur II working fine from the guy I got it from, although the disc is scratched some.
I swapped out the T5 disc and dongle for SC2's disc and 2 dongles, and made sure to swap the jumper pins on the board to get into 246+ mode. When turning on the cab, the monitor comes on but stays black. No sound at all. LEDs on the 256 are on as well as the IO board. Disc drive activity light comes blinks for a few seconds, then I hear the drive spin, then both stop. Nothing else from that point on.
To make sure I didn't do something wrong, I did everything in reverse and Tekken 5 still boots normal. Is it possible that the drive isn't compatible? I saw Soul Calibur II working fine from the guy I got it from, although the disc is scratched some.