- Thread starter awbacon1
- Start date
J
jassin000
They are super handy for sure, I wish someone made a set of multimeter leads that ended in alligator clips (maybe they do I've just never seen 'em).
Haha look at that, they do!
I need to order a set!
Haha look at that, they do!
I need to order a set!
Last edited by a moderator:
they make adapters you can slide onto the probe tips, like this https://www.amazon.com/dp/B002AMO5EI
sorry but Aligator clips are terrible for PCB work. like trying to use a sledge hammer to build a birdhouse. they scratch up PCBs and test points and even your probes.
even the alligator clips on helping hands I cover each jaw with heat shrink tube so I can use them to hold my PCBs without scratching them up.
IMO For most stuff you should be using hook clips instead: https://www.amazon.com/Yohii-Temper...TY1Q3NMPW89&psc=1&refRID=MVD22KNXJTY1Q3NMPW89
even the alligator clips on helping hands I cover each jaw with heat shrink tube so I can use them to hold my PCBs without scratching them up.
IMO For most stuff you should be using hook clips instead: https://www.amazon.com/Yohii-Temper...TY1Q3NMPW89&psc=1&refRID=MVD22KNXJTY1Q3NMPW89
While you are buy stuff for multi meter get yourself some nice probemaster. All attachments you will need plus highest quality probes at good pricing.
https://probemaster.com/dmm-multimeter-test-leads/
https://probemaster.com/dmm-multimeter-test-leads/
J
jassin000
oooh that is some hot prob'n action!
Brings new meaning to the phrase "just the tip" heh
