Voultar’s “Capcom Classics” Jamma Adapter

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Voultar’s “Capcom Classics” Jamma Adapter

      DIY

      Description :

      The Capcom Classics adapter is to be used for the select number of Capcom arcade titles which use the “Capcom Classics” proprietary arcade pinout. This adapter allow you to seamlessly & safely interface your Capcom arcade PCB’s directly to the Jamma standard with no wiring harness.Was designed this to work with both official and “most” bootleg equivalents, but he can not guarantee complete bootleg compatibility.

      The following OEM game PCB's are supported:
      • Avengers/Hissatsu Buraiken
      • Commando/Senjou No ookami
      • Exed Exes
      • Ghosts 'n Goblins/Makaimura
      • Gun.Smoke
      • Legendary Wings/ Ares No Tsubasa
      • Savage Bees
      • Section-Z
      • Space Invasion
      • Trojan/Tatakai No Banka
      Multi's: CPS2 / F3 / M72 / NA1-2 / System16 B / Namco System1 Vector Labs' 4 in 1 (Horizontal)
      Superguns : HAS v3.1
      Scalers : OSSC v1.6 / RetroTINK-2X
      Scart switch : Gscartsw V5.2
      JNX: Spitfire
      NAC: Splitfire


      My Arcade Stuff

      The post was edited 3 times, last by AlxUnderBase ().

    • $40 from OSHPark?

      The ones I sell are half the price, assembled. That’s the problem with OSH for boards that big because it has prototype pricing. Mine don’t support bootlegs unless the pinouts are the same.

      If anyone needs just the PCBs for any of my adapters just PM me.
      Images
      • 8C1B2FC8-22D3-4C4B-B743-50B50C6DA48F.png

        498.33 kB, 640×1,136, viewed 39 times
    • XianXi wrote:

      $40 from OSHPark?

      The ones I sell are half the price, assembled. That’s the problem with OSH for boards that big because it has prototype pricing. Mine don’t support bootlegs unless the pinouts are the same.

      If anyone needs just the PCBs for any of my adapters just PM me.
      Yeah sir ... i don't understand the OSH prices , but it's their bussiness. i'll choose China everytime for a purpose like this for exemple, if i need a board to assemble . Looks nice your adapter btw , i don't intend to use in this life a bootleg (no offence for nobody who have bootlegs in their collection) ^^
      Multi's: CPS2 / F3 / M72 / NA1-2 / System16 B / Namco System1 Vector Labs' 4 in 1 (Horizontal)
      Superguns : HAS v3.1
      Scalers : OSSC v1.6 / RetroTINK-2X
      Scart switch : Gscartsw V5.2
      JNX: Spitfire
      NAC: Splitfire


      My Arcade Stuff
    • XianXi wrote:

      $40 from OSHPark?

      The ones I sell are half the price, assembled. That’s the problem with OSH for boards that big because it has prototype pricing. Mine don’t support bootlegs unless the pinouts are the same.

      If anyone needs just the PCBs for any of my adapters just PM me.
      You make some of the best stuff :thumbup:

      Where do I browse through all your current offerings, need to see what else I could need.


      Found: Garegga, Bakraid, Gunnail, Hyper Duel
      Wanted: PCBs - Batsugun, Rapid Hero, Air Gallet Arts/Pop/Manuals - Garegga, Bakraid
      Vewlix CP Shipping Brackets (2x red sets preferred)
    • AlxUnderBase wrote:

      XianXi wrote:

      $40 from OSHPark?

      The ones I sell are half the price, assembled. That’s the problem with OSH for boards that big because it has prototype pricing. Mine don’t support bootlegs unless the pinouts are the same.

      If anyone needs just the PCBs for any of my adapters just PM me.
      Yeah sir ... i don't understand the OSH prices , but it's their bussiness. i'll choose China everytime for a purpose like this for exemple, if i need a board to assemble . Looks nice your adapter btw , i don't intend to use in this life a bootleg (no offence for nobody who have bootlegs in their collection) ^^
      If the file is downloadable, I suggest using a different fabhouse and buy at least 10pcs, should be about $2-2.50 each.

      Derick2k wrote:

      XianXi wrote:

      $40 from OSHPark?

      The ones I sell are half the price, assembled. That’s the problem with OSH for boards that big because it has prototype pricing. Mine don’t support bootlegs unless the pinouts are the same.

      If anyone needs just the PCBs for any of my adapters just PM me.
      You make some of the best stuff :thumbup:
      Where do I browse through all your current offerings, need to see what else I could need.
      everything is in the JNXstore for browsing but I’m always making new stuff. I always post my new stuff on my IG (@jamma_nation_x) and the JNX FB page as well. Of course if you don’t see what you might need, just email/PM me.
    • XianXi wrote:

      everything is in the JNXstore for browsing but I’m always making new stuff. I always post my new stuff on my IG (@jamma_nation_x) and the JNX FB page as well. Of course if you don’t see what you might need, just email/PM me.
      Cool, I had checked your store a while back and I think there was domain error or something like that. Ill definitely be in touch for some stuff.


      Found: Garegga, Bakraid, Gunnail, Hyper Duel
      Wanted: PCBs - Batsugun, Rapid Hero, Air Gallet Arts/Pop/Manuals - Garegga, Bakraid
      Vewlix CP Shipping Brackets (2x red sets preferred)