CPS2 Digital AV Question

[shorjewken]

Sorry in advance if this is not the right place to post this. I'm finally getting around to installing one of these and had a question for the coax. Just wanted to confirm that I'm supposed to solder the center conductor to C1/C2 on the AV pcb and on the CPS2 PCB and that the shielding needs to be soldered to ground. Let me know if I'm missing something stupid.

 

[Steam313]

Yes you are correct, If you want an image to look at here: https://retrostuff.org/wp-content/uploads/2019/10/cps2digi_12-1024x794.jpg and here: https://retrostuff.org/wp-content/uploads/2019/10/cps2digi_11-1024x701.jpg

 

[shorjewken]

Thank you kind sir. Had some noise initially based on the installation instructions but the retrostuff site helped a lot, and it worked much better once I soldered to the clock buffer.