What's new

Shadoron

Beginner
Joined
Jul 6, 2017
Messages
13
Reaction score
12
Location
WI, USA
I'm in the middle of re-capping a Denjin Makai II / Guardians PCB. The cap at C17 has a scratched label, and I can't make out if its 220uf @ 10V or 220uf @ 16V. Anyone have the *Korean single board* version of the PCB around, that could let me know? Also, there's two different cap list threads here. Which one is the one people are settling on using? I'll add the cap list for this PCB to it, once I'm finished. Thanks.
 
As above, just use 16V and you're safe either way.
 
I had already put the 16V in, just wanted to get the original value for the cap database(s) here. I should have mentioned that in the original post!
 
Last edited:
Hi, you have the list of the capacitor needed for d. Makai II korean version?
Please let me know.
 
C2 - 470uf 16v
C4 - 470uf 16v
C5 - 470uf 16v
C14 - 1uf 50v
C15 - 470uf 16v
C16 - 220uf 25v
C17 - 220uf 16v * Could be 10v, original cap was scratched. 16v will work.
 
Back
Top