Hi - hoping some technical wizard can magic up som help. I got a New Net City cabinet recently and have installed the RiverService JAMMA loom, however when i turned it on for the first time today i got a horrible image on the monitor - wrong colours, over exposed, blurred etc.
I read somewhere about the Toshiba monitor having two video inputs - one 0.7v and one 3v. My Dsub15 cable comes off the Jamma loom and goes to the VGA connector wired to the 0.7v monitor input (C in the image).
Is the answer to swap the plugs so the cable goes to the 3v (D in the image) ? I read on Neo Arcadia website someone did this, but it was a French translation so cannot guarantee its the same issue.
Before i try - and blow up the monitor /me, does anyone know or could shed some light on why the image is bad. I have rechecked all instructions ln the RiverService wiring and fairly sure the rest is hooked up correctly.
Thanks
I read somewhere about the Toshiba monitor having two video inputs - one 0.7v and one 3v. My Dsub15 cable comes off the Jamma loom and goes to the VGA connector wired to the 0.7v monitor input (C in the image).
Is the answer to swap the plugs so the cable goes to the 3v (D in the image) ? I read on Neo Arcadia website someone did this, but it was a French translation so cannot guarantee its the same issue.
Before i try - and blow up the monitor /me, does anyone know or could shed some light on why the image is bad. I have rechecked all instructions ln the RiverService wiring and fairly sure the rest is hooked up correctly.
Thanks