Brook UFB pins/headers part numbers?

[rewrite]

Thanks to @meybarra I've got a UFB to throw in one of the Vewlixes. Not the version that comes with the headers pre-installed, and I thought I'd had some pins laying around, but I don't!

Anyone happen to know the part numbers off-hand for the right size pins/headers so I don't end up ordering the wrong ones? I just need what's required for Arthrimus's I/O adapter.

 

[hursit]

I have checked it before for my arcade sticks.
Some of the Brooks are coming with Pin _pre-added version. Some of them not.

They are JST connectors. 2mm 4p or 5p. Male 90 Degree PCB and Female Sockets

https://www.digikey.com/catalog/en/partgroup/ph-series/8404
https://www.digikey.com/products/en?mpart=S4B-PH-K-S(LF)(SN)&v=455

 

[meybarra]

I found this on ArcadeShock for the 20-pin:

https://arcadeshock.com/products/20-pin-male-header-gold-plated

 

[rewrite]

Thanks @hursit and @meybarra !

 

[hyp36rmax]

I have checked it before for my arcade sticks.
Some of the Brooks are coming with Pin _pre-added version. Some of them not.

They are JST connectors. 2mm 4p or 5p. Male 90 Degree PCB and Female Sockets

https://www.digikey.com/catalog/en/partgroup/ph-series/8404
https://www.digikey.com/products/en?mpart=S4B-PH-K-S(LF)(SN)&v=455

YES Exactly what i was looking for! Anybody know what JST connector is the female 20-pin?