What's new

Zitz

Enthusiast
Joined
Aug 31, 2019
Messages
131
Reaction score
54
Location
Melbourne
Hey yo some of you know me by now im zitZ located in Australia i was very lucky to snatch up a dynamo bigblue with its groovy streetfighter 3 label on the back pretty sure by memory that means sf2HF

anyway since i now have this here in aus i was gonna do a quick power swap and transformer swap but then realised the chassis is 110v powered
What are the suggestions i should get for a proper stepdown converter and should a run the meanwell psu on 110 aswell off the stepdown or use 240v for that im adding a 240v inlet to power the sound system as its missing the qsound as this model didnt cone with but cause im making it a SSF2TX i want the beat sound experience plus run the lighting aswell off 240v ....

So as for powering the chassis and cps2 board which stepdown is recomended and will i need a isolation stepdown aswell also what W should i get heres some pics oh whats left inside
E138C314-0FD6-4328-86A8-232584D39C9A.jpeg
AB7E23D3-1859-4333-9129-32D0AC9F9BFF.jpeg
A04CCB21-9CF8-4A59-B847-9868CC003E63.jpeg
 

Attachments

  • ED8ED4B8-B792-4BF8-B966-5A44D6BDDB11.jpeg
    ED8ED4B8-B792-4BF8-B966-5A44D6BDDB11.jpeg
    300.3 KB · Views: 132
  • AE091566-FF46-4BB5-9647-0D5FB76090C4.jpeg
    AE091566-FF46-4BB5-9647-0D5FB76090C4.jpeg
    364.2 KB · Views: 135
  • 88601E5D-6806-4F82-A48D-45F1F4F5C6D6.jpeg
    88601E5D-6806-4F82-A48D-45F1F4F5C6D6.jpeg
    228.8 KB · Views: 114
you can get 240v input 120v output isolating transformers for this purpose.
just dont wire the monitor degausing circuit through it - unless you want to blow the windings!
 
Back
Top