Dangun Feveron
Has Background lines
Battle Bakraid
Sometimes working sometimes not booting
Help
Has Background lines
Battle Bakraid
Sometimes working sometimes not booting
Help
Dangun Feveron Background Lines
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
I'm not the expert here, but quick questions:
1. Any PCB damage? Any cut traces, broken components, bent pins, or bridged traces?
2. Was it working before?
3. Re-seat all the EPROMs.
Can you post clean picture of the PCBs? -
I see these same lines occasionally on both of my superguns. A quick cleaning of the Jamma edge/connectors and a firm reseat usually clears it up. If you are getting funkiness in two different boards, maybe start there.
-
Try cleaning the supergun JAMMA connector too.
ArcSys101 wrote:
The board is very clean
Maybe im gonna give it another good cleaning in the jamma edge
Can't hurt anyway!On the hunt for: Dinoking, Mushiking, Love & Berry, Egret 29, and an SNK SC-25.
Shameless plug: Rewrite's Recaps - Your monitor and PSU recapping service center -
What setup are you using? From memory I had issues like this with my Boardmaster Control Box? Could also be your video cable if it’s a supergun?
Multis: CPS-1, CPS-2, CPS-3, F3, S16, ST-V, MVS, AES, M72, Crystal System, G-Net, Naomi, TTX2
PVMs: 2043MD, 20M2MDA, 20L2MD
Devices: Sentinel Gold / Ultracade uVC / JAMMAizer! / Framemeister XRGB-mini
PCBs: VAPS Profile
-
Share
-
Users Online 1
1 Guest