Report2Marty
Student
Greetings Everyone!
So, I’ve been going through it with this AWSD...
Here’s a brief history... Swapped tubes and using a Wei-Ya universal chassis and using a 100v step down transformer.. Started to See waves in the screen. Went to turn off machine and got shocked. Grounded the green earth ground wire from the three prong cord (which connects the chassis to the isolated outlet) to the ground screw located near the PSU.
Tried modding the transformer from a two prong cord to a three prong to help connect earth ground. When I plug the AWSD into the 100v side of the modded step down and plug the step down into the GFI outlet on my wall, it pops the GFI outlet.
I’m losing my mind......
please help....
So, I’ve been going through it with this AWSD...
Here’s a brief history... Swapped tubes and using a Wei-Ya universal chassis and using a 100v step down transformer.. Started to See waves in the screen. Went to turn off machine and got shocked. Grounded the green earth ground wire from the three prong cord (which connects the chassis to the isolated outlet) to the ground screw located near the PSU.
Tried modding the transformer from a two prong cord to a three prong to help connect earth ground. When I plug the AWSD into the 100v side of the modded step down and plug the step down into the GFI outlet on my wall, it pops the GFI outlet.
I’m losing my mind......
please help....