What's new

Gonzo

Enthusiast
Joined
Jun 25, 2016
Messages
139
Reaction score
62
Location
Puerto Rico
Sorry for the moon question, but I came by a Hitachi board and was wondering where does the Red,blue,green,yellow wires goes.Here's a pic just in case.
DSC_0530.JPG
 
For video input?

It's the 5-pin connector in the lower left corner in your pic.

hitachi_video_input.jpg

There's five wires: red, green, blue, sync & ground
 
Oh I forgot about those Thx for the reply. But i will connect those plus post another pic of the wires.
 
For video input?

It's the 5-pin connector in the lower left corner in your pic.

hitachi_video_input.jpg

There's five wires: red, green, blue, sync & ground
For video input?
It's the 5-pin connector in the lower left corner in your pic.

hitachi_video_input.jpg

There's five wires: red, green, blue, sync & ground
Mines doesn't connect there. That looks like for the control board. Already found it but I don't know if I connected it right. When i turned on nothing but white screen.
 
Dude I correctly installed all wires. Now it's up and running with a new cap kit. I left this project sitting in the garage for about a year and i forgot to put everything back lol. Thanks for the help.
 
  • Like
Reactions: nem
D'oh, I only now understood OP meant the connectors for the deflection yoke.

Are you asking for those, @SBDESIGN?
 
For video input?

It's the 5-pin connector in the lower left corner in your pic.

hitachi_video_input.jpg

There's five wires: red, green, blue, sync & ground
Hi @nem,

Can you confirm the wiring order (from left to right if facing connector from outside of board)?
1. R
2. G
3. B
4. Sync (White)
5. Ground (Black)
 
Last edited:
Well, I started doubting myself, and sure enough, Impress manual is right and I was wrong. Oops.

hitachi_gmk_29fs2_video_input_connector.jpg
 
Guess I am glad I didn't turn it on. What a counter intuitive pinout.

Thanks for the photo.
 
Back
Top