SNK-NEO-GEO
Enlightened
Hello there...Does anyone know the MiSter FPGA I/O RGBS pinout (the one that looks like VGA)
Also - Groovymame with a compatible video card CRTEmu, what are the VGA ping out for RGBS and ground? My understanding is that Groovymame support both RGBS and RGBHV..I will be setting it for RGBS..
I need to connect the 13" Amuzy cabs arcade 15khz CRT to a PC running GroovyMame and to a MiSter. I am not sure what else I would need to create this cable..Do I need a 220ohms resister on the RGB lines?? Has anyone directly connected a 15khz arcade CRT monitor (not the trisync with VGA connector) to a MiSter FPGA over the I/O or a PC running Groovymame on RGBS without a Jpac/extron etc.. just a direct cable? How is this done? thanks in advance for the the feedback.
Also - Groovymame with a compatible video card CRTEmu, what are the VGA ping out for RGBS and ground? My understanding is that Groovymame support both RGBS and RGBHV..I will be setting it for RGBS..
I need to connect the 13" Amuzy cabs arcade 15khz CRT to a PC running GroovyMame and to a MiSter. I am not sure what else I would need to create this cable..Do I need a 220ohms resister on the RGB lines?? Has anyone directly connected a 15khz arcade CRT monitor (not the trisync with VGA connector) to a MiSter FPGA over the I/O or a PC running Groovymame on RGBS without a Jpac/extron etc.. just a direct cable? How is this done? thanks in advance for the the feedback.