So I got my CPS2 and Darksoft Multikit up and running, and it's awesome for the most parts, so to the issue at hand.
If I run sound through the river service jamma harness in my NNC I get sound as usual and everything is fine.
When I want to have stereo sound however, and connect RCA cables to CPS2 RCA contacts and to the amplifier in the NNC, I hardly get any sound.
If I am very quiet, I can hear a very faint sound from the game.
So to the steps that I've already tried:
I don't see any switch on the amplifier or cab for any setting that might help.
Is the RCA contacts on my A board broken?
If I run sound through the river service jamma harness in my NNC I get sound as usual and everything is fine.
When I want to have stereo sound however, and connect RCA cables to CPS2 RCA contacts and to the amplifier in the NNC, I hardly get any sound.
If I am very quiet, I can hear a very faint sound from the game.
So to the steps that I've already tried:
- Turning volume knob on cab does nothing
- Increasing / decreasing sound on CPS2 does nothing
- Ensuring CPS2 is set to stereo doesn't help
- Holding volume down for 20 sec on boot, and then turn volume up, does not help
I don't see any switch on the amplifier or cab for any setting that might help.
Is the RCA contacts on my A board broken?