Linbergh Power Issue

[Tonybolony]

So my Lindy just turned off by itself , its powere with a Bronze 400w ATX switching power supply and i connect the 4 pin 12v to the Mobo from the PS also , tried a old power supply off a raw thrills dell , the one that has no switch, but a button you can hold down for power, and the lindy powers up (till i take finger off the PS button), so ok i think buy a new PS so got a 500w atx switching ps again , and nothing wont turn on ? any ideas, ever happened to anybody?

 

[videotronicsuk]

LOOKS manky

but recapped and tested

https://videotronicsuk.com/lindbergh-power-supply.html

 

[bobbydilley]

Strange that it doesn't work with that specific power supply - it's just a computer so any ATX PSU should work fine.

After testing it again with the Dell PSU to check it will still turn on, I'd just have to suggest buying another PSU - it might be that the one you've purcahsed is broken anyway / is very bad quality and the voltages aren't correct.

 

[Tonybolony]

so i removed the battery , then put it back in the next day, and all is ok again