What's new

St4rgalaqtic

Enthusiast
Joined
Jun 26, 2017
Messages
178
Reaction score
120
Location
Pittsburgh,PA
Have come to the conclusion that I have to rewire my control panel and maybe do some rewiring on my jamma harness. Just wondering if anyone knows the model of the molex connectors used on the control panel. The are the 12 pin ones with locking tab on the top. Any direction is greatly appreciated.
 
The Egret 2 uses the same connectors as the Egret 3, and you'll see the connectors listed here: https://wiki.arcadeotaku.com/w/Taito_Egret_II

One is a 15-pin connector for player 1, one 12-pin for player 2, and don't forget the 2-pin S connector if you need P1button6 and P2button6. There's actually another connector labeled C3 that is also connected to P1button6 and P2button6 but I haven't found a part number for that one.
 
Thank you both, I want to try and do this myself so I know for future use. If I fail Lemony it is.
 
Back
Top