What's new

el Loco

Beginner
Joined
Jul 16, 2020
Messages
16
Reaction score
2
Location
germany
Hello, I come directly to the point, hope someone can help me:
I want to run Lindbergh on my Ringedge Driving Cab, and Ringedge games on my Lindbergh Shooting Cab.The AC in´s are different, so: does anybody sell or know where to buy adapter cables? Plastic connectors only would be ok too. I want tinker as little as possible on my Cabs, so I would be gratfull for any note on adapters.
Thanks for any help, best regards, Frank.
 
For lindbergh, you can use a standard ATX PC to power the Lindbergh.

The Power Supply for the Lindbergh is an external PSU. The RingEdge has an internal PSU, I believe the thresholds are the same as in the US (not sure) where you can plug the RingEdge directly to the power source. I believe there is a forum member that sells the wires for RingEdge 2 but you do not need to link Lindbergh PCs to RingEdge, you just need to use the power line going into the Lindbergh PSU to go to the RingEdge instead.
 
I think I have a few of these power connectors left. I've made a bunch in the past for the ringedge motherboard.
 
Back
Top