What's new

mugen_ketsueki

Professional
Joined
Apr 2, 2017
Messages
303
Reaction score
100
Location
Jersey City, NJ
Having issues with the board. I got it and i switched the Ram to 4GB and also made the Niko SSD Image file. Was working flawlessly for 5 hours. Afterwards it forze mid game then kinda rebooted it self, made like white and red lines on the screen then BSOD came up. Some people say it's the GPU that will fix it if replaced. Some people said it's the RAM. Others say it's the SSD. Try to reseat things and make sure the drive was working and so on. Even flashed the bios for the GPU and nothing. Can use some help if anyone knows. I don't have a New GPU to test it with but i am trying to see what can be done.


TTX2 Model: 210A
Rev: 10B board
Gskill 2x 2GB ram sticks
500GB SSD
CPU: P4 3.4GHz
GPU: GF7900GS

This is the picture i am getting atm.
116597192_294647935316272_5507160201170050115_n.jpg
 
Having issues with the board. I got it and i switched the Ram to 4GB and also made the Niko SSD Image file. Was working flawlessly for 5 hours. Afterwards it forze mid game then kinda rebooted it self, made like white and red lines on the screen then BSOD came up. Some people say it's the GPU that will fix it if replaced. Some people said it's the RAM. Others say it's the SSD. Try to reseat things and make sure the drive was working and so on. Even flashed the bios for the GPU and nothing. Can use some help if anyone knows. I don't have a New GPU to test it with but i am trying to see what can be done.


TTX2 Model: 210A
Rev: 10B board
Gskill 2x 2GB ram sticks
500GB SSD
CPU: P4 3.4GHz
GPU: GF7900GS

This is the picture i am getting atm.
116597192_294647935316272_5507160201170050115_n.jpg
If you put back the original RAM module, is it OK ? Which 4GB RAM modules have you put ?
 
well if i put the 512MB i get a different error. But i am using GSkill Ram right now.
 
What kind of error with 512 MB one ? When I was looking for 1 GB for mine, I added another DDR2 667 1RX16 module.
 
I think it was the 0x00000007E error. That’s with the 512 MB both Ram installed. The on I get with the GSkill ram is 0x000000050 which is the screen shot shown above.
 
Did you change the CPU out? Which model TX2 is this (check the white sticker on the top of the case)?
 
TTX2 Model: 210A
Rev: 10B board
Gskill 2x 2GB ram sticks
500GB SSD
CPU: P4 3.4GHz
GPU: GF7900GS

No i haven't I am trying to see what it is one by one right now i have a replacement GPU on the way then if that isn't working then CPU will be next.
 
Let us know what happens once you get around to swapping some more of the components. I got similar errors in the past on a few TX2s and I was never able to figure out the problem. The only commonality I was able to find was that the boards all had bulging caps, but recapping didn't fix the problem, so I could only conclude it was some other issue on the motherboard that I wasn't able to diagnose or fix.
 
so how did you solve the problem?
 
Back
Top