Jamma harness and amp where to buy????

[SNK-NEO-GEO]

Guys.. looking to convert the Dino cabs into a full jamma.. do you guys have any recommendations where I could buy good quality jamma hardness fully populated with with -5v, +5v, 12v .110 buttons plugs.


Also, I want to add and amp to the cab that looks arcade type and not car looking type.. any recommendations?

thanks in advance.

 

[Mackie]

I would go with twisted quarters.
https://twistedquarter.com/index.php?main_page=index&cPath=177

 

[SNK-NEO-GEO]

I would go with twisted quarters.
https://twistedquarter.com/index.php?main_page=index&cPath=177

Thanks..I might have to reach out to them.. not sure about the -5, .110, I forgot also to include ready to plug to a one of those power supply.

 

[Mackie]

yeah if you want to use that psu, you will need to work a little bit on some of the wires directly on the harness or make another cable that goes from your psu to a molex and plug that molex to the the harness.

 

[SNK-NEO-GEO]

yeah if you want to use that psu, you will need to work a little bit on some of the wires directly on the harness or make another cable that goes from your psu to a molex and plug that molex to the the harness.

Thanks for the feedback..I am trying to see if @hursit can sell me some of the cute repo wiring harness. I think that’s the best approach for now.