First attempt at consolizing - Atomiswave

[MrTanuki]

Here is my first attempt at consolizing. Almost done with it. There is a top lid that is missing from the picture, as well as a badge. Both are currently coated in primer and awaiting paint. I wanted to make a modular setup that I could swap to another Atomiswave if anything where to happen. Also I wanted to be able to do everything off a jamma connector and leave the motherboard as stock as possible ( audio points aside).

Using Sammy Guilty Gear PS1/PS2 Controllers with Retroelectronik adapters. Only ones I could find with the 5 button atomiswave layout and really wanted Sammy controllers to use with it.


I will update the post when its totally finished.

 

[werejag]

what is the case originally? nice feet on the unit. where from?

 

[djsheep]

What game were the Sammy/PS controllers made for?

 

[MrTanuki]

What game were the Sammy/PS controllers made for?

Guily Gear XX #reload. They also had a 5 button arcade stick for the same game. Great dpads and buttons. A really nicely made fight pad. Havent tried the arcade stick.

 

[MrTanuki]

what is the case originally? nice feet on the unit. where from?

All the parts are 3d printed pieces I made. Thought it would be a fun time to get into 3d printing so used this build as a starting point.