Sega outrun start button help

[kingau]

Hi Everyone

I have a sega out run Start button and need help on which wires go to which pin.
it is a sega light up button and there is four pins on the back of the button and four wires to the machine.

thanks in advance

 

[Mitsurugi-w]

Pic would be helpful

 

[twistedsymphony]

those buttons are such enormous pieces of shit. and $30+ for a new one. sadly I've yet to find a suitable replacement.

In any case the spec sheet is here: http://www.devicetec.net/Images/sunmulon/pushbuttons/DH_miniature_lighted_pushbutton_switches.pdf

Not every button has ever pin filled so chances are yours will have empty slots for the unused pins.

I think last time I needed to figure it out I just disassembled the thing.

 

[kingau]

Hi every one here are some pics

I just don't know which wire goes where?

 

[twistedsymphony]

The spec sheet I linked to yesterday has the pinout to that button.

The SUMULON illuminated push buttons have been used by Sega for start buttons from the mid-80s to present day and they all have the same pinout and shitty build quality.