C CoolFox Grand Master Joined Jul 26, 2015 Messages 553 Reaction score 748 Location California Sep 23, 2020 #1 So I'm trying to make one with a CPS3 using the cps2black thingie. Reason being I have a few cps2 blacks with problems. How would I go about doing this with a SCSI2SD? Last edited: Sep 23, 2020
So I'm trying to make one with a CPS3 using the cps2black thingie. Reason being I have a few cps2 blacks with problems. How would I go about doing this with a SCSI2SD?
yosai Enthusiast Joined Sep 29, 2015 Messages 264 Reaction score 200 Location London Sep 23, 2020 #2 It should be the same as normal but write the image file to an SD card rather than a CD. I did a conversion a while back and didn't experience any problems from what I can remember. Resurrecting/Converting CPS2 Black All in One Board
It should be the same as normal but write the image file to an SD card rather than a CD. I did a conversion a while back and didn't experience any problems from what I can remember. Resurrecting/Converting CPS2 Black All in One Board
C CoolFox Grand Master Joined Jul 26, 2015 Messages 553 Reaction score 748 Location California Sep 23, 2020 #3 Yeah, I kinda figured it out. Apparently the tester doesn't like keys being injected via the pic12f675 or it will red/orange screen.
Yeah, I kinda figured it out. Apparently the tester doesn't like keys being injected via the pic12f675 or it will red/orange screen.
KaPH33n Champion Joined Sep 30, 2018 Messages 1,000 Reaction score 1,340 Location CA Sep 23, 2020 #4 I would expect the tester or any utilities written for cps2 would have to run unencrypted. or phoenix style.
I would expect the tester or any utilities written for cps2 would have to run unencrypted. or phoenix style.