What's new

Escarioth

Grand Master
Joined
Feb 13, 2019
Messages
534
Reaction score
949
Location
Quebec
is there a way to hook up the Nintendo vs gun
when you use the pcb with jamma adapter on another cab ?

I dont own a nintendo vs./playchoice cab
 
To my knowledge, if your running it on a crt. it should work.
The light gun connects to the nintendo pcb...
don't know if the gun, would be compatible with other boards.
 
it's a plain old optical sensor, any old zapper type gun can be used - but as mentioned it must be a 15Khz CRT monitor.
no lcd's or scalers/vga convertors in the cab.
 
since i do not use a real nintendo VS. cab with original cables...
how can you plug the gun ? is there a special way to hook it up ?
(ill use it with a jamma adapter)

my main arcade cab is a MK2
 
gun wiring is shown in the schematics/manual

in short,
you have ground, 5v
the optical signal, and the trigger
 
yeah i took a look at it.
wasnt very sure if i could just hook it up directly on board.

thanks for the infos :)
ill go study the schematic a bit to help
 
Back
Top