GamingDoyle
Student
So, I’m a huge dope. Just getting into this hobby and I bought a retroelectronik pro gamer supergun to use with my SFII CPS1 board. (I know, I know everyone says to get a HAS and I very much want to but you can’t even wait list currently)
Anyway, here’s where I’m a dope. I hooked up a kick harness to the supergun and wasn’t getting more than light kick. (No buttons 5 & 6). I took the cable apart and touched the ground and button wires like a mechanical switch in a cab would and Ryu obliged nicely. Thanks buddy.
Well, I bought a couple of these so I could use my existing DualShock 4s:
https://focusattack.com/brook-super-converter-ps3-ps4-to-neogeo-adapter/
Seems they are literally NeoGeo to PS4. As in 4 buttons. Ugh.
So my question is, what’s either a good controller or a good adapter/controller recommendation to use to go from the DB15 on the retroelectronik with all 6 buttons? I know retroelectronik sells various pad adapters for snes and such so guess I could just buy from them but figured I’d see what the nice folks of this community had for thoughts.
Thanks!
Anyway, here’s where I’m a dope. I hooked up a kick harness to the supergun and wasn’t getting more than light kick. (No buttons 5 & 6). I took the cable apart and touched the ground and button wires like a mechanical switch in a cab would and Ryu obliged nicely. Thanks buddy.
Well, I bought a couple of these so I could use my existing DualShock 4s:
https://focusattack.com/brook-super-converter-ps3-ps4-to-neogeo-adapter/
Seems they are literally NeoGeo to PS4. As in 4 buttons. Ugh.
So my question is, what’s either a good controller or a good adapter/controller recommendation to use to go from the DB15 on the retroelectronik with all 6 buttons? I know retroelectronik sells various pad adapters for snes and such so guess I could just buy from them but figured I’d see what the nice folks of this community had for thoughts.
Thanks!