What's new

mark6974

Beginner
Joined
Oct 25, 2019
Messages
7
Reaction score
2
Location
Italy
Hi Guys,


these days I have decided to replace the new batteries for my cps2, in a ssf2 after change the original battery (the game worked fine,without problems) the game continued to works fine but after 2 days when turn on the board on the screen appeared a RED SCREEN at first I thought a suicide of the board...so I decided to program board by arduino method but to no avail :(
the board is rev.3
any suggestions?
thanks
Marco

p.s 3 - 4 attempts with arduino methid, try to solder a 4.7 k ohm and re-program but nothing ||
 
Hi Folks,
In this days i tried a swap all rom kit phoenix B board (capcom sports club) with another phoenix board (SSF) and I found that the problem is not in phoenix rom but in the B board.

viewed the pcb and there are no breaking traces.
But have this component in this contition
Cattura1.JPG


result a static unicolor (red,or green, or other)

have any ideas about componet? diode?
 

Attachments

  • Cattura2.JPG
    Cattura2.JPG
    72.8 KB · Views: 158
Back
Top