Hatsune Mike
Champion
It was me, I got it. I have a lot of work ahead of me.
This poor wounded bird has landed:
Of course, everything about the control panel is bad news. I don't want these American controls in here at all.
On the bright side, the top green acrylic piece is intact and survived the trip.
I am also pleased to find it has a front door, even though it's got a notch cut in it.
The perpetrator has ignored the panel that exists behind the coin door, and drilled holes and put this in the front instead.
Let's see just how bad it is underneath the control panel.
Oh no...
This is how the spinner controller was "isolated"
And a JPAC.
This is what's left of the nice crimped JAMMA harness.
The entire control panel upper has been routed out. The metal mounting brackets that should be inside are missing.
This was just twisted, wrapped, and zip-tied. What is this, some grounds? It was routed out of the floppy drive of the old PC that was shoved in there.
The wiring is a hot mess.
They had the gall to remove the inner service panel. Why??
First step for me is going to be to source an entire CP upper. That's going to be hell...
This poor wounded bird has landed:
Of course, everything about the control panel is bad news. I don't want these American controls in here at all.
On the bright side, the top green acrylic piece is intact and survived the trip.
I am also pleased to find it has a front door, even though it's got a notch cut in it.
The perpetrator has ignored the panel that exists behind the coin door, and drilled holes and put this in the front instead.
Let's see just how bad it is underneath the control panel.
Oh no...
This is how the spinner controller was "isolated"
And a JPAC.
This is what's left of the nice crimped JAMMA harness.
The entire control panel upper has been routed out. The metal mounting brackets that should be inside are missing.
This was just twisted, wrapped, and zip-tied. What is this, some grounds? It was routed out of the floppy drive of the old PC that was shoved in there.
The wiring is a hot mess.
They had the gall to remove the inner service panel. Why??
First step for me is going to be to source an entire CP upper. That's going to be hell...
Last edited: