How to power an ms2931 on without cab hookups

[tengugurl]

Hi!
I am looking to power my ms2931 on without having it connected to my blast city.

I only hesitate to add power as I know this is 100v which I can use a step down converter.

Do you know which side is the hot side (black or white) line to a typical 3 prong cable.

Just trying to turn it on and keep it as a bench testing monitor.

Thinking of trading it for a d9200 idk..
Just want to get it to turn on without it hooked up to a cab

 

[brad808]

Can run at 120v np ( Check manual). I have one on my bench tonight. 3 prong black hot, white neutral, green ground.

 

[tengugurl]

Nice! But do you know which color goes to the wire I am holding in the pic?

 

[brad808]

Nice! But do you know which color goes to the wire I am holding in the pic?

yes neither. That's not the AC input. AC input is right above the fuse in your pic

 

[tengugurl]

Ohhhh... Sure right, aka the connector that it went to on the cab lol

Do you have the pinout for that?
I want to look for that online in a few seconds just curious if you had it at your disposal

 

[rewrite]

All that you need and more exists if you only make an attempt to find it.

https://wiki.arcadeotaku.com/w/Nanao_MS-2931

First result when you google "Nanao ms2931 manual". Second result is the pdf on the wiki page.

 

[tengugurl]

thanks! Appreciate the link
This site is amazing.