I have two D29C051s with PB9929 chassis that I recapped at the same time. The first one works great, but the second one no longer wants to power up, instead it makes a chirping sound. The working chassis works on both tubes, so the tubes are okay.
Both chassis were recapped with the same capacitors, and I have gone over both side-by-side to confirm that nothing is installed backwards, shorted, or otherwise installed improperly. I also replaced the ceramic cap at C808 on both, since it was cracked on the working chassis.
I see that a bad HOT or flyback can be the issue here, but I wouldn't think one would give out on me right after I recap it. I could also use the working chassis to swap parts around to find the culprit, but I fear that a bad component may cause damage to the working parts.
https://www.youtube.com/watch?v=qo19trRyMQI Here's a link to what it is doing, any advice would be appreciated.
Both chassis were recapped with the same capacitors, and I have gone over both side-by-side to confirm that nothing is installed backwards, shorted, or otherwise installed improperly. I also replaced the ceramic cap at C808 on both, since it was cracked on the working chassis.
I see that a bad HOT or flyback can be the issue here, but I wouldn't think one would give out on me right after I recap it. I could also use the working chassis to swap parts around to find the culprit, but I fear that a bad component may cause damage to the working parts.
https://www.youtube.com/watch?v=qo19trRyMQI Here's a link to what it is doing, any advice would be appreciated.